PREPARATION
Connections
Before you use this VCR, it is necessary to connect it to your TV. Several ways of connecting are available depending on your use of TV or cable box. Select one which is applicable to your equipment.
Antenna/VCR/TV Connection
1 Disconnect the antenna cable from your TV and connect it to the RF IN terminal on the VCR.
2 Connect the RF OUT terminal to the TV.
VHF/UHFcombination | VHF antenna | UHF antenna | ||
only | only | |||
antenna | ||||
|
| |||
| I N | 1 |
| |
LINE | (FROM ANT.) |
| ||
OUT | (FROMI NANT.) |
| ||
R |
|
|
| |
AUDIO |
|
|
| |
L | OUT RF |
|
| |
|
|
| ||
VIDEO | (TO TV) |
|
| |
| OUT RF | 2 | VHF/UHF | |
| (TO TV) |
| ||
|
|
| ||
VHF UHF
Antenna splitter (not supplied)
AUDIO/VIDEO Connections
The AUDIO/VIDEO jacks are also available to connect your TV.
PREPARATION
LINE | I N |
OUT | |
R | (FROM ANT.) |
| |
AUDIO |
|
L | OUT RF |
| |
VIDEO | (TO TV) |
LINE OUT VIDEO | VIDEO IN |
LINE OUT AUDIO | AUDIO IN |
When connected your TV using the AUDIO/VIDEO OUT jacks
To watch video pictures, set the video input mode
on your TV. For the video input mode, refer to the
manual of your TV.
Cable Connection
Choose one of the below according to your usage of the cable box.
This set-up will enable you to:
LINE | I N |
OUT | |
R | (FROM ANT.) |
| |
AUDIO |
|
L | OUT |
| |
VIDEO | (TO TV) |
Incoming cable
–record an unscrambled channel.
–watch an unscrambled channel while recording it.
–record an unscrambled channel while watching another (only when you connect a cable- compatible TV).
You will need to:
•select TV channel 3 or 4 to receive video signals.
(See page 14)
•. to record a channel while watching another, press TV/VCR on the remote control to turn off the “VCR” indicator in the VCR display and select a desired channel on the TV (only when you connect a
11
W522CG ENG new | 11 | 2/20/04, 11:16 |