Toshiba RD-XV48KE Digital Audio for Better Sound Quality, After You Have Completed Connections

E3LG0ED_EN.book Page 21 Wednesday, April 30, 2008 11:52 AM

Note

•When you record a TV programme from a Satellite Box, you must connect a Scart cable to AV2 (DECODER). (See page 37.)

•When AV2 is connected, the signal from the AV2 will be output automatically. If you want to monitor the signal from other input, you must press [DISPLAY] first. Then, select the desired input to monitor with [INPUT SELECT F].

Recording from a camcorder or other Audio-Video equipment with no Scart output socket (AV3/AV4)

Connect to AUDIO / VIDEO input jacks on the front panel using an RCA Audio/Video cables.

When connecting a DV-camcorder, use DV input jack of AV4 (Front).

AV3/AV4 (Front)

1 For clear digital sound quality, use the DIGITAL AUDIO OUT (COAXIAL) jack to connect your digital audio equipment.

If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

Connecting a Dolby Digital™ decoder, DTS decoder or MPEG decoder

•Connecting multi-channel Dolby Digital decoder allows you to enjoy the Multi-channel Dolby Digital surround system as well as DTS decoder, Multi- channel surround system.

•After connecting to a Dolby Digital decoder, set “Dolby Digital” to “Stream” in “Audio Out” menu. (See pages 74 - 75.)

•After connecting to a DTS decoder, set “DTS” to “ON” in “Audio Out” menu. (See pages 74 - 75.)

•After connecting to a MPEG decoder, set “MPEG” to “Stream” in “Audio Out” menu. (See pages 74 - 75.)

Introduction Connections Basic Setup

			SELECT		HDD/DVD
BBING		VCR	HDD	DVD	REC
R	DVD				HDD DVD
D	DVD

Video cable

(not supplied)

Audio cable

(not supplied)

DV cable (4-pin)

(not supplied)

Connecting to an MD deck or DAT deck

• The audio source recorded in Dolby Digital Multi-

channel surround format cannot be recorded using

an MD or DAT deck as a digital sound.

• If not connected to a Dolby Digital decoder, set

“Dolby Digital” to “PCM” in “Audio Out” menu.

Playing back a DVD using incorrect settings may

generate noise distortion and damage speakers.

• Set “Dolby Digital” and “MPEG” to “PCM” and set

“DTS” to “OFF” in “Audio Out” menu for connecting

to an MD or DAT deck.

Recording Playback

VIDEO OUT AUDIO OUT DV OUT

Note

•When connecting an external device of monaural output to this unit, use AUDIO L jack of AV3.

Digital Audio for Better Sound Quality

Dolby Digital decoder,	Digital audio
DTS decoder or	input jacks
MPEG decoder, etc.
	COAXIAL
	Coaxial cable
	(not supplied)
COAXIAL
HDMI OUT

The connections illustrated above are optional for better sound.

• You can use AUDIO OUT (L\R) jacks for the

connection of your audio system.

After You Have Completed

Connections

Switch the input selector on your TV to an appropriate external input channel. For details, refer to the Owner’s Manual of your TV.

Note

•Connect this unit directly to the TV. If the AV cables are connected to a VCR, pictures may be distorted due to the effects of the copy protection system.

EN 21

Editing Function Setup VCR Functions Others