Toshiba RD-XV48KE owner manual Disc Menu Language Default English DVD only

E3LG0ED_EN.book Page 75 Wednesday, April 30, 2008 11:52 AM

Dynamic Range Control (Default: ON) (DVD only)

Set to “ON” to make the dynamic range narrower.

Select a setting using [U \ D], then press [ENTER].

Dynamic Range Control

ON

OFF

Your setting is activated.

“Dynamic Range Control” function is effective only with analogue audio connection.

Note

•“Dynamic Range Control” function is available only on discs recorded in the Dolby Digital format.

PCM sampling (Default: 48kHz)

Select a setting using [U \ D], then press [ENTER].

PCM

48kHz 96kHz

Your setting is activated.

48kHz:	If your amplifier / decoder is NOT
	compatible with 96 kHz PCM, select
	“48kHz”. Sound recorded at 96 kHz is
	down sampled to 48 kHz.
96kHz:	If your amplifier / decoder is compatible
	with 96 kHz PCM, select “96kHz”. Sound
	is sampled at 96 kHz.

Note

When playing back a disc with copyright protection:

•Even if you select “96kHz”, the sound is down sampled to 48 kHz.

Dolby Digital conversion (Default: Stream)

Select a setting using [U \ D], then press [ENTER].

Dolby Digital

PCM

Stream

Your setting is activated.

PCM:	Converts the Dolby Digital into PCM
	(2 channel).
	If your amplifier / decoder is NOT
	compatible with Dolby Digital, set to
	“PCM”.
Stream:	Outputs Dolby Digital signals.
	If your amplifier / decoder is compatible
	with Dolby Digital, set to “Stream”.

Hint

When playing back a DVD-RW disc recorded in VR mode:

•If the audio source on a disc is in Dolby Digital format, set “Dolby Digital” to “PCM” so that you can switch to main audio (L), sub audio (R), or a combination of both (L / R) using your amplifier / decoder.

Settings for MPEG (Default: PCM) (DVD only)

Select a setting using [U \ D], then press [ENTER].

MPEG

 PCM

Stream

Your setting is activated.

PCM:	Converts MPEG into PCM.
	If your amplifier / decoder is NOT
	compatible with MPEG, set to “PCM”.
Stream:	Outputs MPEG Audio signals.
	If your amplifier / decoder is compatible
	with MPEG, set to “Stream”.

Settings for DTS (Default: ON) (DVD only)

Select a setting using [U \ D], then press [ENTER].

DTS

ON

OFF

Your setting is activated.

ON:	Outputs DTS signals.
	If your amplifier / decoder is compatible
	with DTS, set to “ON”.
OFF:	No DTS signal is output.
	If your amplifier / decoder is NOT
	compatible with DTS, set to “OFF”.

3. Disc Menu Language (Default: English) (DVD only)

Set “Disc Menu Language”.

Select a setting using [U \ D], then press [ENTER].

Disc Menu Language

English French Spanish German

Italian

Swedish

Dutch

Other

Your setting is activated.

4. Audio Language (Default: Original) (DVD only)

Set “Audio Language”.

Select a setting using [U \ D], then press [ENTER].

Audio Language

Original

English

French

Spanish

German

Italian

Swedish

Dutch

Other

Your setting is activated.

If “Original” is selected, the audio language is the default of the inserted disc.

EN 75

Introduction Connections Basic Setup Recording Playback Editing Function Setup VCR Functions Others