Tr o u b l e s h o o t i n g

This troubleshooting guide may help you find a possible cause of and solution to a problem. If there are still problems, please contact the local service centre or distributor.

PROBLEMS AND POSSIBLE SOLUTIONS

PROBLEM	POSSIBLE SOLUTION
No power supply	Check that the plug has been inserted properly
	into the socket.
	Check the connection between DVD player and
No picture	TV set.
	Check that the TV set is working properly.
	Check the connection between DVD player and
No sound	any other connected units.
	Check that TV set and amplifier are working
	properly and adjusted correctly.
	Check that the disc has been inserted correctly.
The disc is not played	Clean the disc.
	Remove any objects blocking the signal
Does not react to signals	between remote control and DVD player.
from the remote control	Check that the remote control is aimed at the
	front panel sensor.
	Check batteries and replace as required.
	Check the disc for dust and scratches.
Picture interference	Clean or replace the disc.
	Turn off the device, wait for ten seconds and
	turn it on again.
No reaction when buttons	Power drop-out, power cuts, etc.
are pressed	Turn off the device, wait for ten seconds and
	turn it on again.