Audio Setup

S y s t e m s e t u p

SCREEN SAVER

If the unit is not used for 2 minutes, the screen saver will be activated. This will prolong the service life of the connected TV set. The screen saver is preset to “ON”.

LAST MEMORY

This function will remember where the DVD was stopped the last time and allow you to continue from that point. Last Memory is preset to “ON”.

SPDIF SETUP

Here you set up the digital sound format that comes from the co-axial or optical output on the back panel. This signal is used when the unit is connected to a digital surround receiver.

OFF: Closes the digital outputs.

RAW: Opens for the pure, non-modulated digital signal.

PCM: Stands for Pulse Code Modulation. It may be necessary to activate this function if the digital surround receiver cannot recognise the sound format.

LPCM OUTPUT

Here the digital output format is selected. If 48KHz is selected, the sampling frequency will be converted to 48KHz. If 96KHz is selected, the sampling frequency of the digital signal will not be converted.

Includes Downmix setup, SPDIF setup, Dolby Digital setup and HDCD setup.

DOWNMIX

Here the analogue sound format is selected.

5.1

LT/RT: A kind of Dolby Pro Logic format. It is used when the unit is connected to a Pro Logic receiver through stereo RCA cables.

STEREO: Used when the unit is connected to a TV solely through a Scart cable, or when the unit is connected to a Dolby Pro Logic II receiver through stereo RCA cables.

5.1: Used when the unit is connected to a 5.1 analogue receiver through the 5.1 outputs.

DUAL MONO

Here you can choose between stereo, left channel mono, right channel mono or mixed mono. This function can e.g. be used for a VCD with two languages (e.g. English on the left- hand side and French on the right-hand side) where you choose only to hear one channel in both speakers.