HOW TO OPERATE
9. Edit, Save, and Print Song list
To edit, save and print the song list of
All songs newly captured in
3
Disc Recording
This part describes how to make an Audio CD from the recorded tracks. From the initial Welcome screen, press JB/CD button to switch from JUKE to DISC (DISC1/DISC2) mode. Press OPEN/CLOSE button on the remote control to open the disc drive and insert a blank
Do not use the OPEN/CLOSE button on the disc drive itself.
Press MENU button to show the FUNCTIONS window. Use the 
/ 
buttons to move to 3. Disc Recording and press 
button to enter.
1. Select Drive (DISC1 / DISC2)
Press 
to enter. Select, using 
/
buttons, the disc drive which contains the blank
2. Select File (All / Select)
Choose to write all tracks or some selected tracks only. If some, choose Select and press . A new window SELECT FILE will appear. Use the 
/ 
buttons to move along the files and use button to select or unselect each file. When the selection is complete, press to return.
3. Writing speed ( 1 / 2 / ... / 40)
Press 
to enter. Select a speed for recording. Normally, it is set at 8x.
4. Write files
Press 
to record the selected files onto the
5. Delete files
Press 
to delete the selected files.
52