Computer System HyperTools | Tevion | |
|
|
|
5.4 Using the DVD Recorder
5.4.1 Scheduling the Recording of a TV Program on DVD
Even though it is preferable and much more flexible to do your recordings on the hard disk (HDD) there may be occasions when you will want to schedule a TV program to be recorded straight to a DVD. You may, for example, have been asked to record a program for someone else, in which case a DVD is the way to go.
Once the recording has been accomplished, the DVD can be played straight away on the DVR, or you can add other programs to the DVD until there is no more space left on the DVD.
It is important to realise, however, that the DVD cannot be played on a computer or on another DVD player until it has gone through the process of Disk Finalisation.
1.On TRC press the 
Power button to turn on the TV (if not already on).
2.On TRC press the 
button until 
2 is shown.
3.On DRC press the STANDBY/ON button to turn on the DVR and wait until “Hello” display on front panel has been replaced by “No disc” message shown on screen.
4.On DRC press the DVB button (once or twice) to show TV programs from digital channels.
5.On DRC press the TIMER button to enter the Timer Recording menu:
6.Use the Down Arrow button to move to the first blank line in the Timer Recording menu, then press the SELECT button and wait a few seconds for the Timer Recording Setup menu to appear:
F:\Our Files\Our Computers\User Guides\Tevion (Wintal)\Tevion | 18/9/08 at 21:49 | Page 26 |