Computer System HyperTools | Tevion | |
|
|
|
5.4.4 Finalising a DVD for External Use
After you have recorded or copied one or more TV programs onto a DVD the DVD can be played straight away on the DVR, but it cannot be played on a computer or on another DVD player until it has gone through a process known as “Disk Finalisation”.
1.On TRC press the 
Power button to turn on the TV (if not already on).
2.On TRC press the 
button until 
2 is shown.
3.On DRC press the STANDBY/ON button to turn on the DVR and wait until “Hello” display on front panel has been replaced by “No disc” message shown on screen.
4.On DRC press OPEN/CLOSE button to open the tray.
5.Insert DVD in tray.
6.On DRC press OPEN/CLOSE button again to close the tray and wait for disk to load.
7.On DRC press DISC OPER button.
8.On DRC move down to the “Finalisation” option and press the SELECT button to display the following message:
WARNING: This operation will finalise the DVD+R disk in loader. If finalised it can not record new content any more. Are you sure to continue?
YES NO
9.On DRC move to YES button and press the SELECT button to display the following message:
Total process needs a few minutes. Do not power off. Working now …
10.After finalisation the DVD can be played on most
11.After finalisation the DVD can also be played on a computer. It will contain folders and files similar to the following:
12.To play the DVD on a computer you may need to
13.To play the DVD on a
F:\Our Files\Our Computers\User Guides\Tevion (Wintal)\Tevion | 18/9/08 at 21:49 | Page 31 |