Toshiba SD-36VESE user manual AV Receiver Connections, Connection below

Connecting DVD-VCR to the TV using the S-Video Cable

You will enjoy high quality images. S-Video seperates the picture element into black and white(Y) and colour(C) signals to present clearer images than regular video input mode.

1	Connect one end of the S-Video cable into the
	S-VIDEOoutput jack on the rear of the DVD-VCR.

2 Plug the other end of the S-Video cable into the appropriate input connector on the television.

3 Connect one end of the AUDIO LINE output cable supplied into the AUDIO LINE output jacks on the rear of the DVD-VCR.

•Take care to respect the colour coding of the left and right channels.

4 Plug the other end of the audio cables into the appropriate input connectors on the television.

AV Receiver

Connections

	To take full advantage of the movie theater experience
	that DVD offers, you may want to connect your DVD-
	VCR to a complete Surround Sound system, including
	an A/V Receiver and six Surround Sound speakers.
	If your A/V receiver is equipped with a Dolby Digital
	Decoder, you have the option to bypass the DVD-VCR’s		Connections
	built-in Dolby Digital Decoder. Use the Digital Audio Out
	connection below.
1		Connect a Digital Audio coaxial cable from the
		Digital Audio Out jacks on the panel of the DVD-

VCR to their corresponding Digital Audio Input jacks on your A/V Receiver:

	Use the S-Video connection method only for
	the DVD.	Digital Audio out
Note
		Jack

3

1

4

2

To Digital Audio Input of an A/V

Receiver with a Dolby, MPEG2, DTS,

Digital Decoder

English - 11