Toshiba SD-36VESE user manual Edit Function

Recording from Another	Using the Assemble
VCR or Camcorder	Edit Function

VCR Functions

You can copy a cassette to your DVD-VCR from another video source, such as another VCR or a Camcorder etc.

•It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any form without the permission of the owners of the corresponding copyright.

1 Connect the output jack of your External devices to the SCART input connector or AUX on the front or rear of the DVD-VCR.

2 Insert a blank cassette in your DVD-VCR.

3 Insert the pre-recorded cassette in the other video source (VCR or Camcorder etc).

	Press the INPUT SEL. button to select the
4 appropriate input on your DVD-VCR:
	• AV1, AV2 for the SCART input
	• AUX for the RCA input
5	Start playing back the cassette to be copied.
	Hold down the REC (●) button for a while to start
6 recording on your DVD-VCR.
7	When you have finished recording, press the
	■ button on both VCR and DVD-VCR.

• If you wish to view the cassette being copied, your DVD-VCR must be connected as usual to the television (refer to page 9 for further details).

This function allows you to start a new recording at a specific position on the cassette while maintaining a very smooth scene change.

1	Insert the cassette to be edited in your DVD-VCR.
2	Press the √ll button to start playback.
	When you reach the position from which you wish
3 to start the new recording, press the √ll button.

	Press the F.ADV/STEP button as often as
4 necessary to advance frame by frame, until the
	exact recording position is located.
5	While the DVD-VCR is in still mode, hold down the
	REC (●) button for a while to activate the
	assemble edit function.
	Select the source from which you wish to record
6 by pressing:
	• The PROG	or button for television
	channels
	• The INPUT SEL. button for the AV1, AV2 or
	AUX input source.
7	Press the √ll button to start recording.
	When you have finished recording, press the

■ button.

28 - English