Toshiba 32FT2U Signal names for mini D-sub 15-pin connector, Ground Reserved, Pin Signal Name

Chapter 2: Connecting your TV

Note:

•• The PC audio input terminals on the TV are shared with the HDMI-1 analog audio input terminals ( page 43).

•• Some PC models cannot be connected to this TV.

•• An adapter is not needed for computers with a compatible mini D-sub15-pin terminal.

•• Depending on the DVD’s title and the specifications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multi-angle scenes.

•Signal names for mini D-sub 15-pin connector

Pin	Signal	Pin	Signal	Pin	Signal
No.	name	No.	name	No.	name
1	R	6	Ground	11	Reserved
2	G	7	Ground	12	SDA
3	B	8	Ground	13	H-sync
4	Reserved	9	5V	14	V-sync
5	Reserved	10	Ground	15	SCL

To connect a PC to the HDMI terminal on the TV:

When connecting a PC with a DVI terminal to the HDMI terminal on the TV, use an HDMI-to-DVI adapter cable and analog audio cables.

Such as a Toshiba PC with an HDMI terminal, use an HDMI cable (type A connector). Separate analog audio cables may not be necessary, depending on PC hardware and setup. ( page 16)

TV back panel

PC audio

cable

Computer	PC audio
	output

HDMI-to-DVI adapter cable

The HDMI input can accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see page 55.

Note:

•• The edges of the images may be hidden.

•• If receiving a 480i (HDMI), 480p (HDMI), 720p, 1080i, or 1080p signal program, Native mode scales the video to display the entire picture within the borders of the screen (i.e. no overscanning).

19