Toshiba 32AV800T Connecting your TV, Using the PC Setting, Adjusting the picture position

Connecting your TV

English

Using the PC Setting

•This function may not be available for some signal or if no signal is received.

•The optimum points of the clock phase and sampling clock adjustments may be incompre- hensible according to the input signals.

Adjusting the picture position

An analogue RGB (15 pin) computer cable can be connected.

1	Press MENU then press or to display
	the WINDOW menu.
2	Press or to select an option you want
	to adjust. Press or to adjust the set-

tings as required.

	WINDOW
H-Position
		100
V-Position
		100
Clock
		100
Phase
		0
Auto Adjust

Adjust Select EXIT Exit

Adjusting the sampling clock

If the sampling clock does not match with the dot clock frequency of the PC, blurred picture detail will occur, or screen width will change, or drift patterns in vertical lines may be apparent.

This function enables you to adjust it and optimize the picture.

1	From the WINDOW menu, press or to
	select Clock .
2	Press or to optimize the picture.

Adjusting the clock phase of the picture

If the clock phase, which synchronize the PC signal and LCD display, is not optimized, the picture will blur.

This function enables you to adjust clock phase and display a clear picture.

1	From the WINDOW menu, press or
	to select Phase .
2	Press or to obtain a clear picture.

Auto Adjust

The Auto Adjust window appears when the PC signal is detected for the first time. Auto Adjust configures the Horizontal position, Vertical position, Sampling clock and Clock phase settings.

1	From the WINDOW menu, press or to
	select Auto Adjust.

2Press .

Note:

Only “H-Position” and “V-Position” are available in the YPBPR mode.

	WINDOW
H-Position
		100
V-Position
		100

Adjust Select EXIT Exit

25