English
Getting started
Connecting an aerial
Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used.
The exact type and positioning of the aerial will depend upon your particular area.
Your Toshiba dealer or service personnel can best advise you on which aerial to use in your area.
Before connecting the aerial cable, turn off all main power switches.
Connect the cable TV or outdoor aerial to the ANALOGUE CABLE (75Ω) terminal to receive the analogue TV system signal.
32AV800E/32AV800T/32AV800V TV back view
From cable TV or outdoor aerial
(ANALOGUE CABLE)
Exploring your new TV
Installing the remote control batteries
Remove the battery cover.
Insert two R03 (AAA), 1.5V batteries matching the
Cautions:
•Dispose of batteries in a designated dis- posal area. Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
•Attention should be drawn to the environ- mental aspects of battery disposal. Always dispose of batteries in accordance with applicable laws and regulations.
•Never mix battery types or combine used batteries with new ones.
Note:
•If the remote control does not operate correct- ly, or if the operating range becomes reduced, replace both batteries with new ones.
•If the batteries are dead or if you will not use the remote control for a long time, re- move the batteries to prevent battery acid from leaking into the battery compartment.
Effective range
within 5m
8