Toshiba 32HL17 manual Selecting stereo/SAP broadcasts, Adjusting the audio quality

Chapter 6: Using the TV’s features

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows you to output high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language, music, or other audio information (when provided by individual stations).

When the TV receives a stereo or SAP broadcast, the word “STEREO” or “SAP” appears on-screen when Eis pressed. The MTS feature is not available when the TV is in VIDEO mode.

To listen to stereo sound:

1 Press Yand open the Audio menu.

2 Highlight Audio Setup and press T.

Audio

Digital Audio Selector

Audio Settings

Advanced Audio Settings

Audio Setup

3 In the MTS field, select Stereo.

Audio Setup

PC Audio		No
HDMI 1 Audio		Auto
MTS		Stereo
Language		English
Optical Output Format		Dolby Digital
Dolby Digital		Compressed
Dynamic Range Control
	Reset	Done

4 To save the new settings, highlight Done and press T. To reset the settings to the factory defaults, highlight Reset and press T.

Note:

•You can typically leave the TV in Stereo mode because it will automatically output the type of sound being broadcast (stereo or monaural).

•If the stereo sound is noisy, select Mono to reduce the noise.

To listen to an alternate language on an ATSC digital station (if available):

Highlight the Language field in step 3 above, and then press C or c to select the language you prefer.

To listen to a second audio program on an analog station (if available):

Select SAP in step 3 above.

Note:

•A second audio program (SAP) can be heard only on those TV stations that offer it. For example, a station might broadcast another language as a second audio program. If you have SAP on, you will see the current program on the screen but hear the other language instead of the program’s normal audio.

•If you have SAP on and the station you are watching is not broadcasting a second audio program, the station’s normal audio will be output. However, occasionally there is no sound at all in SAP mode. If this happens, set the MTS feature to Stereo mode.

Adjusting the audio quality

You can adjust the audio quality by adjusting the bass, treble, and balance.

To adjust the audio quality:

1 Press Yand open the Audio menu.

2 Highlight Audio Settings and press T.

3 Press b or B to highlight the item you want to adjust (Bass, Treble, or Balance).

Audio Settings

Bass100

Treble100

Balance0

StableSound Off

ResetDone

4 Press C or c to adjust the level.

•C makes the bass or treble weaker or increases the balance in the left channel (depending on the item selected).

•c makes the bass or treble stronger or increases the balance in the right channel (depending on the item selected).

5 To save the new settings, highlight Done and press T. To reset the settings to the factory defaults, highlight Reset and press T.

45