Using the TV’s features
Native
Use this setting for PC connected via HDMI. When receiving video signal source via HDMI input, this setting will display the image correctly without distortion or picture clipping.
Notes:
•In the aerial input signal mode, the picture size selections are Wide, Super Live 2, Cinema
2, 4:3, Super Live 1, Cinema 1, Subtitle and 14:9.
•In the PC input mode (- page 23), the picture size selection is wide or 4:3 only.
•In the teletext mix mode (- page 25), the picture size selection is wide or 4:3 only.
•Using the special functions to change the size of the displayed image (e.g. changing the height/width ratio) for the purpose of public display or commercial gain may infringe on copyright laws.
•If the aspect ratio of the selected format is different from the one of the TV transmission or video programme, it can cause a difference in vision. Change to the correct aspect ratio picture size.
•When using the PC mode, the moving image quality may be deteriorated.
Using the picture still
• Press rto freeze the picture.
Even if an image is frozen on the TV screen, the pictures are running on the input source. Audio continues to be output as well.
To return to a moving picture, press ragain.
(Moving) 
(Still)
Notes:
•If you use this function except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws.
•In the PC input mode (- page 23), this function is not available.
Adjusting the picture position
Adjustment to the position of the picture may be made to suit your viewing preferences.
1 Press MENU, then press I or i to display the SETUP menu.
|
|
|
|
SETUP |
|
| |
|
|
|
|
Language |
| English |
|
Auto tuning | OK | ||
Manual tuning | OK | ||
|
|
|
|
AV connection | OK | ||
Picture Position | OK | ||
|
|
|
|
MENU Back EXIT Watch TV |
|
| |
2
3 Press Q, then press u or U to select an item you want to adjust.
Picture Position
Horizontal Position | 0 |
|
|
Vertical Position | 0 |
Reset | OK |
MENU Back EXIT Watch TV
4 Press I or i to adjust the settings as required.
Horizontal Position | 0 | |||
|
|
|
|
|
Notes:
•When the picture size is in Wide or 4:3 mode, only the Horizontal Position can be adjusted.
•When the picture size is in PC mode, the picture position cannot be adjusted.
Resetting the picture position
This function resets your picture position settings to the factory settings.
1 From the Picture Position menu, press u or U to select Reset.
2 Press Q.
17