Using the TV’s features
Activating the DNR (Digital Noise Reduction)
If the receiving signal is weak and the picture is blurry, the picture may be improved when using this function.
1 From the Picture settings menu, press u or U to select DNR on the 2nd page.
2 Press I or i to select Off, Low, Middle or
High.
DNR | Middle |
|
Note:
This function is available for 480i and 576i signals.
Selecting the colour temperature
You can change the tone of the picture by selecting from three preset colour temperatures: Cool, Natural or Warm.
1 From the PICTURE menu, press u or U to select Colour Temperature.
2 Press I or i to select mode you prefer.
| Colour Temperature | Cool |
|
|
Cool | : Lends a blue hue to the picture. | |||
Natural | : Neutral |
|
|
|
Warm | : Lends a red hue to the picture. | |||
Adjusting the colour management
You can adjust the picture colour quality by selecting from 6 base colour adjustments : Red, Green, Blue, Yellow, Magenta or Cyan.
1 From the PICTURE menu, press u or U to select 3D Colour management.
2 Press I or i, then press I or i to select On.
3D Colour management | On |
|
3 Press Q, then press u or U to select Base colour adjustment.
4 Press Q, then press u or U to select an item you want to adjust.
Base colour adjustment
|
| Hue | Saturation | Brightness |
| Red | 0 | 0 | 0 |
| Green |
|
|
|
| 0 | 0 | 0 | |
| Blue |
|
|
|
| 0 | 0 | 0 | |
| Yellow |
|
|
|
|
|
|
| |
| 0 | 0 | 0 | |
| Magenta |
|
|
|
| 0 | 0 | 0 | |
|
|
|
|
|
| Cyan | 0 | 0 | 0 |
Reset |
|
| OK | |
MENU Back | EXIT Watch TV |
| ||
5 Press i, then press I or i to select Hue, Saturation or Brightness.
Red
| Hue | Saturation | Brightness | |||
|
|
|
|
|
|
|
| 0 |
| 0 |
| 0 |
|
|
|
|
|
|
|
|
MENU Back | EXIT Watch TV | |||||
6 Press u or U to adjust the settings as required.
Notes:
•If you select colour management Off mode, this mode is not available.
•In the PC input mode (- page 30), this mode is not available.
Resetting the base colour adjustment
The Reset function adjusts the base colour adjustment to the factory settings.
1 From the Base colour adjustment menu, press u or U to select Reset.
2 Press Q.
Using the active backlight control
In order to improve screen visibility, the active backlight control sets the screen brightness automatically during dark scenes.
1 From the PICTURE menu, press u or U to select ActiveBacklightControl.
2 Press I or i to select On or Off.
Using the cinema mode
A movie film’s picture runs at 24 frames a second, whereas movie software such as DVD, etc., that you enjoy watching on TV at home runs at 30 (NTSC) or 25 (PAL) frames a second. To convert this signal to reproduce a smooth motion and picture quality, select the On mode.
Effective signal and setup conditions:
•When the Video input mode is selected.
•When the input signal format is 480i and 576i signals.
1 From the PICTURE menu, press u or U to select Cinema Mode.
2 Press I or i to select On or Off.
Note:
When a DVD movie with subtitle is playing back, this mode may not work correctly.
19