Toshiba 36HF12 owner manual Connecting a DVD player or satellite receiver and a VCR, Using, Remote

Page 9

Connecting a DVD player or satellite receiver and a VCR

This connection allows you to watch DVD/satellite, VCR, and TV programs, and record one TV channel while watching another channel.

You will need:

•two (or three, if satellite receiver is used) coaxial cables (one or more may be provided by your cable or satellite company)

•two pairs of audio cables (one single and one pair of audio cables for a mono VCR)

•one video cable (between the TV and VCR)

•one S-video cable (between the TV and DVD player/satellite receiver)

From Antenna

Stereo VCR

VIDEO	AUDIO
	L	R

Note:

For the highest possible picture quality from a non-component video DVD player/satellite receiver, you must use an S-video cable between the TV and DVD player/satellite receiver. (If your DVD player or satellite receiver is component video compatible, see page 10).

Do not connect a standard video cable and an S-video cable between the TV and DVD player/satellite receiver at the same time or the picture performance will be unacceptable.

Do not connect the DVD player/satellite receiver and VCR to the same video channel on the TV. (See the illustrations, which show the DVD player/satellite receiver connected to Video-1 on the TV and the VCR connected to Video-2 on the TV.)

Introduction


Connecting	yourTV

the	Control

IN from ANT OUT to TV

CH 3

IN

Using

CH 4

OUT

Remote

TV
					ANT(75	)
From Satellite Dish
I N				ANT-1	OUT	ANT-2
I N
S-VIDEO		I N			OUT
S-VIDEO
	COLOR		COLOR
VIDEO	STREAM	Y	STREAM	Y	VIDEO
	HD - 1	Y	HD - 2	Y	VAR
					VAR
					AUDIO
L/MONO		PB		PB	L/
L/MONO	L	PB	L	PB	MONO	AUDIO CENTER
AUDIO						AUDIO CENTER
AUDIO						CHANNEL IN
R	AUDIO	PR	AUDIO	PR	AUDIO	L
VIDEO-1 VIDEO-2	R		R			ON OFF
VIDEO-1 VIDEO-2	R		R		R	R
					R	R

DVD player/Satellite receiver

AUDIO

OUT

L

IN from ANT

R

S-VIDEO VIDEO

OUT OUT

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Settingup	yourTV


UsingtheTV’s	Features


Appendix


Index

9

Image 9

Contents 36HF12 Dear Customer Safety PrecautionsInstallation Important Safety InstructionsCare ServiceIntroduction Please Note IntroductionWelcome to Toshiba Exploring your new TVConnecting a VCR Connecting your TVConnecting a cable converter box and VCR Connecting a cable converter boxConnecting your TV From CableIntroduction Connecting YourTV Control Connecting a DVD player or satellite receiver and a VCRUsing Settingup YourTV UsingtheTV’s Features Appendix IndexDVD player with component video From Introduction Connecting YourTV Usingthe RemoteControlAntenna DTV receiver with component videoConnecting a camcorder Connecting two VCRsFrom Antenna CamcorderConnecting an A/V receiver Connecting an audio systemSettingup YourTV To A/V ReceiverPreparing the remote control for use Using the remote controlInstalling the remote control batteries Using the remote control with a VCR or cable TV converterVCR2 and reprogram the remote control Brand name Code number VCR code tableABC Cable TV converter code tableExit exits programming menus Learning about the remote controlIntroduction Connecting YourTV Setting up your TVUsingthe RemoteControl Settingup YourTV UsingtheTV’s FeaturesChanging the on-screen display language Setting up your TVSelecting the antenna input Press x or to highlight your desired languageProgramming channels automatically Adding channels to the TV’s memoryAdding and erasing channels manually Press z to select CH ProgramChanging channels using SpeedSurf Adjusting the tilt correction featureChanging channels Press y or z to highlight ADD/ERASEAdjusting the channel settings Using the TV’s featuresSwitching between two channels Programming your favorite channelsLabeling channels Using the TV’s FeaturesMENU/ENTER Picture tube than in the Compression mode Viewing the wide-screen picture formatsSelecting the image shape PIP mode Setting YourTV UsingtheTV’s Features AppendixExample PIP mode Watching PIP/double-windowPIP mode Double-window mode Switching the main and sub-picturesExample PIP mode Still Changing the position of the small pictureUsing the favorite function Using the multi-window featureUsing the strobe function Setting Your UsingtheTV’s FeaturesPress y or z to display the PIN code entering mode Using the Locks menuEntering the PIN code Continue to set each item following the steps on the nextUsing the V-CHIP menu Usingthe RemoteTV Rating Independent rating system for broadcasters Press x or to return to the Locks menu Mpaa Rating Independent rating system for moviesLocking channels Unlocking programs temporarilyRepeat steps 3 and 4 for other channels Press y or z to highlight Clear ALL, and then press x or Locking video inputsChanging the PIN code Using the front panel lock featurePress Enter New PIN code is now active Buttons to be lockedAdjusting the picture Selecting the picture modeAdjusting the picture quality Using the Digital Noise Reduction DNR feature Using the flesh tone featureTo turn off the DNR feature Highlight OFF in above Saving new preferenceSelecting the cinema mode Selecting the color temperatureResetting picture adjustments Connecting YourTV Control Selecting the video input sourceLabeling the video input sources To view text, highlight T1, T2, T3, or T4 Using the closed caption featureSetting the sleep timer Setting the clockTo set the clock Adjusting the sound Muting the soundSelecting stereo/SAP broadcasts Adjusting the sound quality Using the SRS 3D surround sound featureResetting audio adjustments Using the sub-bass system SBSTo turn off the SBS Highlight OFF in above Turning off the built-in speakers Selecting the Audio OUT soundTo turn on the built-in speakers Highlight on in above Using the StableSound feature Selecting the background of the menu displayDisplaying on-screen information Viewing the demonstration mode Understanding the auto power off featureUnderstanding the last mode memory feature Appendix SpecificationsAntenna TroubleshootingBlack box appears on the screen T2, T3, or T4. Turn closed captioning OFFLimited United States Warranty Limited Canada Warranty Channel programming IndexPage Manufactured by