Toshiba 50L2400U, 40L2400U manual SettingtheAVinputmode, Settingthetimezone, Setti the time zone

SettingupyourTV 47

Setti_ the time zone

To add a channel to the channel memory:

o:* Highlight the checked box next to the channel number you wish to add, and then press the ENTER button to remove the check.

NOTE Youcanalsoblockspecificchannelssothattheycannotbetuned untilyouunlockthem.Forinformation,see"Lockingchannels"on page77.

To manually add digital sub-channels on a physical channel:

Use the Channel Numbers and the (Dash 100) on the remote

control to enter the channel number (for example, 56-1).

If the channel is found, the number will be added to the list and the box will be unchecked. If the channel is not found, a

message appears.

NOTE SkippedchannelscannotbeselectedwiththeCH A/V (arrow) buttons;however,theycanbeaccessedusingthenumberkeysonthe remotecontrol.

SettingtheAVinputmode

This setting determines the configuration of the shared AV input on your TV. You can set this input for either ColorStream HD or Video.

Add the following descriptions:

To set the AV Input mode:

1From Options menu, highlight Input Options, and then press the ENTER button.

2Press •/V(arrow) buttons to select AV Input, and then press the ENTER button.

3 Press •/•(arrow) buttons to select Video or ColorStream HD, and then press the ENTER button to save your new setting.

Settingthetimezone

The Time Zone setup allows you to specify the correct time zone for your region. This feature allows the TV status information to display the correct time zone information for your viewing area.

To set the time zone:

1In the Installation menu, highlight Time Zone, and press the ENTER button.

2Press the •/• (arrow) buttons to select the region, and then press the ENTER button.