8Introduction
Ovelwi_" of instulluO_)n, setup, and use
o:.ENERGY STAR _'qualified
Overviewofinstallation,setup,anduse
Follow these steps to set up your TV and begin using its many exciting features.
1Carefully read the important safety, installation, care, and service information. Keep this document for future reference.
2To choose a location for the TV:
o:.Read "hnportant notes about your TV" on page 8
o!. Place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. Secure the TV to a wall, pillar, or other ilmnovable structure, see 26)
on page 5.
o!. Place the TV in a location where light does not reflect on the screen.
o,** Always leave a space of at least 4 (four) inches around the TV. The slots and openings are provided to protect the TV
from overheating and to help maintain reliable operation of the TV.
3Do not plug in any power cords until after you have connected all cables and devices to your TV.
4Before connecting cables or devices to the TV, learn the functions of the TV's connections and controls, see "Overview of cabte types" on page 22
5Connect your other electronic device(s) to the TV, see "Connecting an HDMI® or DVI device to the HDMI® input" on page 27
6Install the batteries in the remote control, see "Installing batteries" on page 33
7See "Using the Remote Control" on page 33 for an overview of the buttons on the remote control.
8After connecting all cables and devices, plug in the power cords for your TV and other devices. Then press the POWER button on the TV control panel or remote control to turn on the TV. If the TV stops responding to the buttons on the remote control or TV control panel and you cannot turn the TV offor on, unplug the power cords for a few seconds and then plug them in and try again.
9See "Navigating the menu system" on page 41 for a quick overview of navigating the TV's menu system.