Toshiba 50L2400U, 40L2400U manual DisplayingTVstatusinformation, Hdmi InformationDisplay, Limited

SettingupyourTV 91

Displayi_ TVstatus inJormation

Press the •/• (arrow) buttons to select Auto, Full, or

Limited, and then press the ENTER button.

Mode	Description
Auto(default)	AdjustsRGBfull rangesignalautomatically.
Full	ROBin!_u!_s!gna!_o)S_a_ed!no_ang, efrom0to 255.
Limited	RGBinputsignalis displayedin therangefrom16to 235.

The HDMV setting (RGB Range) needs proper HDMI TM source devices. If your HDMI ® source device does not support these features, the TV may not work properly when this feature is enabled.

HDMI® InformationDisplay

Viewing the HDMI ® signal information:

1From the Options menu, highlight HDMI Information Display, and then press the ENTER button.

2Press the • / • (arrow) buttons to select On or Off, and then press the ENTER button.

3When the HDMI Information is set to On, pressing the INFO button displays the HDMI Information banner (Resolution, Scan Type, Frame Rate, Aspect, Bit Depth, Color Space, RGB/ YUV, Chrolna Format). When the HDMI Information is set to Off, the normal banner is displayed.

NOTE ._,,Thesignalinformationbannerwill appearwhenthisfeatureis set to OnandyouwatchanHDMI® inputandpresstheINFO

button.Thesignalinformationwill disappearafterapproximately 60seconds.

¢IfyoupresstheINFObuttonwhenthisfeatureis setto Off,only thenormalbannerwill appear.

DisplayingTVstatusinformation

To display TV status information using the RECALL button:

o!. Press the RECALL button on the remote control.

The following information will be displayed (if applicable):

o!. Current input (ANT/CABLE, Video, etc.)

o!. If ANT/CABLE is the current input, either"CABLE" (for cable TV) or "ANT" (for over-the-air broadcasts).

o!. Channel number (if in ANT/CABLE mode)