Convergence, Picture position, Still picture

Picture controls continued

Convergence

On this television the red, green and blue images are projected separately onto the screen. They converge to form full colour and when they converge correctly you will see a clear picture. It is especially apparent when viewing cartoons. The green is fixed and therefore not adjustable. The red and blue are factory set and should need little or no adjustment. However, convergence may drift over time or if the television is moved.

Select a television channel and let the television warm up for at least 30 minutes before realigning the colours…

1In the SET UP menu press Q until Convergence is highlighted. Press R.

2If the white cross in the centre of the screen has a RED 'shadow' press the RED button and Sor R and P or Q until the RED 'shadow' disappears. If there is a BLUE 'shadow' press the BLUE button

and Sor Rand P or Q. Adjust the RED and BLUE until only the white cross is visible.

1	2	3
4		6
•red	•blue
EXIT	To exit
7	8	9

3If the edges of the screen are not correct, select the numbers in turn e.g. number 1 selects the top left hand corner of the screen, the number will be replaced by a white cross, repeat step 2.

4Press EXIT to go back to the television screen and check the picture. If more adjustment is needed, simply repeat steps 1 and 2.

It will be neccesary to adjust the convergence for each widescreen format.

Picture position

The picture position may be adjusted to suit personal

preference and can be particularly useful for

external inputs.

1Select the SET UP menu.

The options alter depending on the widescreen format chosen and when viewing connected equipment.

In Cinema:

SET UP


Language	▼	English	▼
Country	▼	UK	▼
Auto tuning			▼
Manual tuning			▼
Programme sorting			▼
AV connections			▼
Horizontal position			▼ ▼
Vertical position			▼ ▼
Convergence			▼

2Press Q to select an option, then S or R to adjust the settings.

Automatic format (Widescreen)

When this television receives a true Widescreen picture and Auto format is On, it will automatically be displayed in Widescreen format, irrespective of the

television’s previous setting.

1Select Auto format from the FEATURE menu, then select On or Off.

FEATURE

Teletext	▼	Auto.	▼
Panel lock	▼	Off	▼
Auto format	▼	On	▼
Blue screen	▼	On	▼


EXIT :To exit

Still picture

This television’s 100Hz double scanning plus digital picture processing produces a flicker-reduced picture. In addition, a still image can be held on the screen.

1Press uto hold an image on the screen. Press uagain to cancel.