Sony MDS-E12 operating instructions Precautions, Handling MDs, About This Manual

Page 3

Precautions

On safety

•Should any solid object or liquid fall into the cabinet, unplug the recorder and have it checked by qualified personnel before operating it any further.

•Caution – The use of optical instruments with this product will increase eye hazard.

On power sources

•Before operating the recorder, check that the operating voltage of the recorder is identical with your local power supply. The operating voltage is indicated on the nameplate at the rear of the recorder.

•The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.

•If you are not going to use the recorder for a long time, be sure to disconnect the recorder from the wall outlet. To disconnect the AC power cord, grasp the plug itself; never pull the cord.

•AC power cord must be changed only at the qualified service shop.

On condensation

If the recorder is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the recorder. Should this occur, the recorder may not operate properly. In this case, remove the MD and leave the recorder turned on for several hours until the moisture evaporates.

On cleaning

Clean the cabinet, panel and controls with a soft cloth slightly moistened with mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.

If you have any questions or problems concerning your recorder, please consult your nearest Sony dealer.

Handling MDs

The MD is enclosed in a cartridge to protect the disc from debris or fingerprints and to make it easy to handle. However, the presence of debris or a warped cartridge may inhibit the disc from operating properly. To ensure that you can always listen to the highest quality music, follow the precautions below:

•Do not touch the internal disc directly. Forcing the shutter open may damage the internal disc.

•Be sure to stick the labels supplied with the md to the appropriate positions. The shape of the labels may vary depending on the MD brand.

Proper Location

Shutter

of the labels

 

Where to keep thge MDs

Do not place the cartridge where it may be exposed to direct sunlight or extremely high heat and humidity.

Regular maintenance

Wipe dust and debris from the surface of the cartridge with a dry cloth.

About This Manual

Conventions

•Controls in the instructions are those on the recorder; these may, however, be substituted by controls on the remote that are similarly named or, when different, appear in the instructions within brackets.

•The following icons are used in this manual;

ZIndicates a procedure that requires use of the remote.

zIndicates tips for making the task easier and hints.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents MDS-E12 For customers in the Europe For customers in CanadaOwner’s Record Precautions Handling MDsAbout This Manual Table of Contents Location and Function of Parts Front Panel Descriptions Rear of the Recorder Remote Descriptions @Á x stop button ¥ M.SCAN button» Scroll button @¼ Clear buttonDisplay Window Discriptions Using the Display Window When you insert an MDWhile the recorder is stopped While the recorder is playing While the recorder is recordingE a M 2 Tr 1 m 2 5 s Inserting batteries into the remote Getting Started After UnpackingHooking Up the Audio Components Cold Getting Started Position of selector Output levelDa t e T i m e D D Y Y Y Y Setting the Clock0 0 7 1 2 1 9 0 Da t e T i m e Y Y M M D DRecording on an MD Recording on MDsWhen TOC indicator flashes When you pause recordingWhen Protected is displayed When Din Unlock flashesDo steps 1 to 5 of Recording on an MD on Press MENU/NO twice Recording for long timesP u t L e v e l A x 5 d B Adjusting the Recording LevelMonitoring the input signal Input Recording TipsErasing blank portions automatically Smart Space/Auto Cut Marking Track Numbers While Recording Track Marking Marking track numbers manually Manual Track MarkingMarking track numbers automatically Automatic Track Marking To stop Time Machine Recording Do steps 1 to 7 of Recording on an MD onIf the CD player doesn’t start playing Do steps 1 to 6 of Recording on an MD on Press Music SyncTo stop Music Synchro-recording Press CD-SYNC StartPress To change Change Recorder to CD player to CD-SYNCHRO StartOperations you may want to do during play Press or turn Playing MDsPlaying MDs To go to Do the following Playing a Specific TrackLocating a track with AMS Playing a track by entering the track Number ZLocating a point while monitoring Sound Search X t N o N a m e 6 Tr 3 m 2 8 sLocating a Particular Point in a Track Reserving the next track during play Next Track PlayRepeating all the tracks on the MD Repeat All Play Z When the play mode is Recorder repeatsPlaying Tracks Repeatedly Repeat Play Repeating the current track Repeat 1 Play ZPlaying Tracks in Random Order Shuffle Play Z Continue playing the track or use M to locateTo stop Repeat A-B Play Checking the order of tracks Program 1 0 0 / 3 S 1 2 m 2 7 sCreating Your Own Program Program Play Programming the tracksStoring the Located Track to Multi-access Play1 - 0 Tr 0 m 0 0 s 1 - 6 Tr 3 m 2 8 sM o r i z i n g M.ACCESS Multi-access play ZChecking the program Press AMS or YES Press MENU/NO Tr 0 m 0 0 s 0 0 fReturning to the Specified Point Locate Play To mark the desired point Mark4 3 s 0 4 f Pausing After Each Track Auto PauseFine adjusting the marked point Rehearsal H e a r s a lAuto Pause and Auto Cue Making Track Play Start Soon Auto CueChanging Playback Speed Variable Speed Play 5 % D R E a M 2 Tr 4 m 0 9 sTo select RAM editing Editing Recorded MDsBefore you start editing RAM editing and Disc editingAbout indications which appear after Editing Using buttons and control for editing OperationsErasing Tracks Erase About indication which appears during EditingExample Erasing portion B2 of the second track Erasing all tracks on an MD ALL EraseErasing a portion of a track A-B Erase Erasing consecutive tracks Multitrack EraseExample combining the second track and fourth Track Combining Tracks CombineCombining two tracks Combine Combining consecutive tracks Multi track CombineExample Moving the second track after the third track Moving Tracks MoveExample Dividing the second track Dividing Tracks DivideDividing a track after selecting a track Dividing a track after selecting Dividing pointTo enter a space Naming a Track or MD using the controls On the recorderI n T r 2 Naming a Track or MD NameNaming a track or MD using the remote Z Copying names Name Copy Copying the same name to all tracks Disc. Name All CopyPress MENU/NO twice while the recorder is stopped To rename a track or disc name, do the following Renaming a track or MD ZErasing a track or disc name Name Erase Erasing all names on the MD Name All EraseUndoing the Last Edit Undo Changing Recorded Level after Recording S.F EditChanging the level of a whole track Turn AMS until YES appears on the display To Use Fade In/Fade OutTo force a stop during writing During writing, press x Stop, MENU/NO or ClearFade-out Play and Fade-out Recording Other FunctionsFade in and Fade Out Z Fade-in Play and Fade-in RecordingOther Functions Using a Timer Playing an MD using a timerRecording on an MD using a timer Control terminal CTRL-S Mini-jack type Rear Panel Terminal FunctionsControl terminal functions Remote Terminal FunctionsRelay Recording Cabling for Relay Relay PlaybackParallel Input-Output Using Fader Play RS-232CSub 9-pin male Selecting keyboard type Operating MD Recorder Using a KeyboardSetting the keyboard Connecting a keyboard to the MD recorderNaming a Track or MD Using the Keyboard Short cut to the naming procedureUsing the Edit Menu Button or function Key Operations using the US or JP keyboardsOperations using the 10-key pad Operating the Recorder Through the KeyboardAssigning Characters to Keyboard Keys Assigning a characterClearing key assignments Operating Recorder Using a KeyboardKeyboard Operations English Keyboard Layout Keyboard Operations 10-Keyboard LayoutLimitations when recording over an existing track Additional InformationSystem Limitations Guide to the Serial Copy Management System Trouble shootingMessage code Cause/Remedy Self-Diagnosis FunctionMessage Meaning Display MessagesSpecifications Rack mounting Exterior dimensionsMenu item Function Parameters Factory Setup Menu TableTo access the Setup Menu SettingMenu item Sub item Function Last Mode MemoryTo access the Edit Menu Edit Menu Table
Related manuals
Manual 72 pages 13.5 Kb

MDS-E12 specifications

The Sony MDS-E12 is a notable addition to the Minidisc player lineup, reflecting Sony's commitment to innovation in the digital audio realm. Released in the late 1990s, this device was designed with a focus on high-quality audio playback and recording, making it a preferred choice for audiophiles and professionals alike.

One of the standout features of the MDS-E12 is its playback precision. Utilizing Sony's proprietary ATRAC (Adaptive TRansform Acoustic Coding) technology, the device processes audio with remarkable fidelity. ATRAC allows for efficient compression of audio files while maintaining impressive sound quality, making the MDS-E12 suitable for both casual listeners and serious music enthusiasts who demand clarity and rich soundscapes from their recordings.

In addition to its playback capabilities, the MDS-E12 also offers seamless recording features. Users can record live audio directly onto the Minidisc, capturing concerts, lectures, or personal performances with ease. The device supports both digital and analog input, allowing for versatile recording options from various audio sources. The built-in microphone input ensures that spontaneous recording is always an option.

Another highlight of the MDS-E12 is its user-friendly interface. The device includes a well-designed LCD display that provides essential information such as track numbers, play time, and remaining recording capacity. The intuitive layout of controls ensures that users can navigate easily through menus and settings, enhancing the overall user experience.

Moreover, the MDS-E12 incorporates a range of playback options. Users can enjoy repeat play, shuffle mode, and program play to customize their listening experience. The ability to label tracks enhances organization, allowing users to manage their collections effectively.

The Sony MDS-E12 is also built with durability in mind. Its robust design can withstand the rigors of daily use, catering to both home listeners and those on the go. The compact size of the device makes it portable, which is ideal for users who appreciate the flexibility of enjoying their audio on various occasions.

In terms of connectivity, the MDS-E12 features optical and coaxial digital outputs, as well as a headphone jack, making it straightforward to integrate with other audio equipment. Its performance, combined with comprehensive features and great sound quality, solidifies the Sony MDS-E12's place in the digital audio history, representing an era where Minidisc technology provided a fresh alternative to cassette tapes and CDs.
Top Page Image Contents