Sony MDS-E12 operating instructions Additional Information, System Limitations

Page 64

Additional

Information

This chapter provides additional information that will help you understand and maintain your MD recorder.

System Limitations

The recording system of your MD or Mini-disc recorder is radically different from those use din cassette and DAT recorders, and is characterized by the limitations described below. Note, however, that these limitations are due to the inherent nature of the MD recording system itself, and not to mechanical causes.

“Disc Full” appears in the display even before the MD has reached the maximum recording time

When too many tracks have been recorded in the MD, “Disc Full” appears regardless of the total recorded time. More than 256 tracks cannot be recorded on the MD. To continue recording, erase unnecessary tracks or use a second recordable MD.

“Disc Full” appears before the maximum number of tracks or the maximum recording time has been reached

Fluctuations in emphasis within tracks are sometimes interpreted as track intervals, increasing the track count and causing “Disc Full” to appear.

The remaining recording time does not increase even after erasing a number of short tracks

Tracks under 12 seconds* in length (in stereo mode) are not counted, so erasing them may not lead to an increase in recording time.

*In stereo recording mode. For monaural and LP2 stereo the length is 24 seconds, for LP4 stereo it is 48 seconds.

The total recorded time and the remaining recordable time on the MD may not total the maximum recording time

Recording is in minimum units of 2 seconds* each (in stereo mode), no matter how short the material. The contents recorded may therefore be shorter than the maximum recording capacity. Disc space may be further reduced by scratches on the disc, which are automatically deleted, further reducing time.

*In stereo recording mode. For monaural and LP2 stereo the length is 4 seconds, for LP4 stereo it is 8 seconds.

Limitations when recording over an existing track

•The correct remaining recordable time on the MD may not be displayed.

•You may find it impossible to record over a track if that track has already been recorded over several times. If this happens, erase the track.

•The remaining recording time may be shortened out of proportion to the total recorded time.

•Recording over a track to eliminate noise is not recommended since this may shorten the duration of the track.

•You may find it impossible to name a track while recording over an existing track.

64

Page 63 Page 65
Image 64
Page 63 Page 65
Contents MDS-E12 For customers in Canada For customers in the EuropeOwner’s Record Handling MDs PrecautionsAbout This Manual Table of Contents Location and Function of Parts Front Panel Descriptions Rear of the Recorder Remote Descriptions ¥ M.SCAN button » Scroll button@¼ Clear button @Á x stop buttonDisplay Window Discriptions When you insert an MD Using the Display WindowWhile the recorder is stopped While the recorder is recording While the recorder is playingE a M 2 Tr 1 m 2 5 s Getting Started After Unpacking Inserting batteries into the remoteHooking Up the Audio Components Getting Started Position of selector Output level ColdSetting the Clock 0 0 7 1 2 1 9 0Da t e T i m e Y Y M M D D Da t e T i m e D D Y Y Y YRecording on MDs Recording on an MDWhen you pause recording When Protected is displayedWhen Din Unlock flashes When TOC indicator flashesRecording for long times Do steps 1 to 5 of Recording on an MD on Press MENU/NO twiceAdjusting the Recording Level P u t L e v e l A x 5 d BRecording Tips Monitoring the input signal InputErasing blank portions automatically Smart Space/Auto Cut Marking track numbers manually Manual Track Marking Marking Track Numbers While Recording Track MarkingMarking track numbers automatically Automatic Track Marking Do steps 1 to 7 of Recording on an MD on To stop Time Machine RecordingDo steps 1 to 6 of Recording on an MD on Press Music Sync To stop Music Synchro-recordingPress CD-SYNC Start If the CD player doesn’t start playingCD-SYNCHRO Start Press To change Change Recorder to CD player toPlaying MDs Operations you may want to do during play Press or turnPlaying MDs Playing a Specific Track Locating a track with AMSPlaying a track by entering the track Number Z To go to Do the followingX t N o N a m e 6 Tr 3 m 2 8 s Locating a Particular Point in a TrackReserving the next track during play Next Track Play Locating a point while monitoring Sound SearchWhen the play mode is Recorder repeats Playing Tracks Repeatedly Repeat PlayRepeating the current track Repeat 1 Play Z Repeating all the tracks on the MD Repeat All Play ZContinue playing the track or use M to locate Playing Tracks in Random Order Shuffle Play ZTo stop Repeat A-B Play 1 0 0 / 3 S 1 2 m 2 7 s Creating Your Own Program Program PlayProgramming the tracks Checking the order of tracks ProgramMulti-access Play 1 - 0 Tr 0 m 0 0 s1 - 6 Tr 3 m 2 8 s Storing the Located Track toMulti-access play Z M o r i z i n g M.ACCESSChecking the program Tr 0 m 0 0 s 0 0 f Returning to the Specified Point Locate PlayTo mark the desired point Mark Press AMS or YES Press MENU/NOPausing After Each Track Auto Pause Fine adjusting the marked point RehearsalH e a r s a l 4 3 s 0 4 fMaking Track Play Start Soon Auto Cue Auto Pause and Auto Cue5 % D R E a M 2 Tr 4 m 0 9 s Changing Playback Speed Variable Speed PlayEditing Recorded MDs Before you start editingRAM editing and Disc editing To select RAM editingUsing buttons and control for editing Operations Erasing Tracks EraseAbout indication which appears during Editing About indications which appear after EditingErasing all tracks on an MD ALL Erase Erasing a portion of a track A-B EraseErasing consecutive tracks Multitrack Erase Example Erasing portion B2 of the second trackCombining Tracks Combine Combining two tracks CombineCombining consecutive tracks Multi track Combine Example combining the second track and fourth TrackMoving Tracks Move Example Moving the second track after the third trackDividing Tracks Divide Dividing a track after selecting a trackDividing a track after selecting Dividing point Example Dividing the second trackNaming a Track or MD using the controls On the recorder I n T r 2Naming a Track or MD Name To enter a spaceNaming a track or MD using the remote Z Copying the same name to all tracks Disc. Name All Copy Copying names Name CopyPress MENU/NO twice while the recorder is stopped Renaming a track or MD Z Erasing a track or disc name Name EraseErasing all names on the MD Name All Erase To rename a track or disc name, do the followingChanging Recorded Level after Recording S.F Edit Undoing the Last Edit UndoChanging the level of a whole track To Use Fade In/Fade Out To force a stop during writingDuring writing, press x Stop, MENU/NO or Clear Turn AMS until YES appears on the displayOther Functions Fade in and Fade Out ZFade-in Play and Fade-in Recording Fade-out Play and Fade-out RecordingOther Functions Playing an MD using a timer Using a TimerRecording on an MD using a timer Rear Panel Terminal Functions Control terminal functionsRemote Terminal Functions Control terminal CTRL-S Mini-jack typeCabling for Relay Relay Playback Relay RecordingParallel Input-Output RS-232C Using Fader PlaySub 9-pin male Operating MD Recorder Using a Keyboard Setting the keyboardConnecting a keyboard to the MD recorder Selecting keyboard typeShort cut to the naming procedure Naming a Track or MD Using the KeyboardUsing the Edit Menu Operations using the US or JP keyboards Operations using the 10-key padOperating the Recorder Through the Keyboard Button or function KeyAssigning a character Assigning Characters to Keyboard KeysClearing key assignments Recorder Using a Keyboard Keyboard Operations English Keyboard LayoutKeyboard Operations 10-Keyboard Layout OperatingAdditional Information Limitations when recording over an existing trackSystem Limitations Trouble shooting Guide to the Serial Copy Management SystemSelf-Diagnosis Function Message code Cause/RemedyDisplay Messages Message MeaningSpecifications Exterior dimensions Rack mountingSetup Menu Table To access the Setup MenuSetting Menu item Function Parameters FactoryLast Mode Memory To access the Edit MenuEdit Menu Table Menu item Sub item Function
Related manuals
Manual 72 pages 13.5 Kb

MDS-E12 specifications

The Sony MDS-E12 is a notable addition to the Minidisc player lineup, reflecting Sony's commitment to innovation in the digital audio realm. Released in the late 1990s, this device was designed with a focus on high-quality audio playback and recording, making it a preferred choice for audiophiles and professionals alike.

One of the standout features of the MDS-E12 is its playback precision. Utilizing Sony's proprietary ATRAC (Adaptive TRansform Acoustic Coding) technology, the device processes audio with remarkable fidelity. ATRAC allows for efficient compression of audio files while maintaining impressive sound quality, making the MDS-E12 suitable for both casual listeners and serious music enthusiasts who demand clarity and rich soundscapes from their recordings.

In addition to its playback capabilities, the MDS-E12 also offers seamless recording features. Users can record live audio directly onto the Minidisc, capturing concerts, lectures, or personal performances with ease. The device supports both digital and analog input, allowing for versatile recording options from various audio sources. The built-in microphone input ensures that spontaneous recording is always an option.

Another highlight of the MDS-E12 is its user-friendly interface. The device includes a well-designed LCD display that provides essential information such as track numbers, play time, and remaining recording capacity. The intuitive layout of controls ensures that users can navigate easily through menus and settings, enhancing the overall user experience.

Moreover, the MDS-E12 incorporates a range of playback options. Users can enjoy repeat play, shuffle mode, and program play to customize their listening experience. The ability to label tracks enhances organization, allowing users to manage their collections effectively.

The Sony MDS-E12 is also built with durability in mind. Its robust design can withstand the rigors of daily use, catering to both home listeners and those on the go. The compact size of the device makes it portable, which is ideal for users who appreciate the flexibility of enjoying their audio on various occasions.

In terms of connectivity, the MDS-E12 features optical and coaxial digital outputs, as well as a headphone jack, making it straightforward to integrate with other audio equipment. Its performance, combined with comprehensive features and great sound quality, solidifies the Sony MDS-E12's place in the digital audio history, representing an era where Minidisc technology provided a fresh alternative to cassette tapes and CDs.
Top Page Image Contents