Sony MDS-E12 Using a Timer, Playing an MD using a timer, Recording on an MD using a timer

Page 54

Other Functions

Using a Timer

By connecting a timer (not supplied) to the recorder, you can start and stop playback/recording operations at specified times. For further information on connecting the timer or setting the starting and ending times, refer to the instructions that came with the timer.

MENU / NO YES

AMS

Playing an MD using a timer

1Do steps 1 to 4 of “Playing an MD” on page 27.

2Press MENU/NO twice.

“Setup Menu” appears in the display.

3Turn AMS (or press ./> repeatedly) until “Timer” appears in the display; press AMS or YES.

4Turn AMS (or press ./> repeatedly) to select “Play”; press AMS or YES.

5Press MENU/NO.

6Set the timer as required.

•When you have set the time for start of playback, the recorder turns off by timer. When the specified time arrives, the recorder turns on and starts playing.

•When you have set the time for the end of playback, playback continues. When the specified time arrives, timer turns off and the recorder stops playing.

•When you have set the time for both the start and end of playback, the recorder turns off by timer. When the starting time arrives, the recorder turns on and starts playing. When the ending time arrives, timer turns off and the recorder stops playing.

7Selecting play mode (pages 32 and 33)

When you only want to listen to certain tracks, create a program as shown on page 33. When playback is to continue to a desired time and then stop, press 7 and playback begins.

Note

Because Multi-access playback is based on single playback, Multi-access play is in valid by using “Timer” function.

When finished using a timer for playback

If “TIMER” of the “Setup Menu” is left on “PLAY”, playback will automatically begin every time power to the recorder is turned on. When timer playback is not desired, set “TIMER” to “OFF”.

Recording on an MD using a timer

1Do the following steps of “Recording on an MD” on page 19.

To specify the time for

Do

the start of recording

Steps 1 to 5, then press x

The end of recording

Steps 1 to 10

Both start and end of

Steps 1 to 5, then press x

recording

 

2Press MENU/NO twice.

“Setup Menu” appears in the display.

3Turn AMS (or press ./> repeatedly) until “Timer” appears in the display; press AMS or YES.

4Turn AMS (or press ./> repeatedly) to select “Rec”; press AMS or YES.

5Press MENU/NO.

6Set the timer as required.

•When you have set the time for start of recording, the recorder turns off by timer. When the specified time arrives, the recorder turns on and starts recording.

•When you have set the time for the end of recording, recording continues. When the specified time arrives, timer turns off and the recorder stops recording.

•When you have set the time for both the start and end of recording, the recorder turns off by timer. When the starting time arrives, the recorder turns on and starts recording. When the ending time arrives, timer turns off and the recorder stops recording.

When finished using a timer for recording

If “TIMER” of the “Setup Menu” is left on “REC”, the recorder will automatically start recording every time power is turned on. When timer recording is not desired, set “TIMER” to “OFF”.

Be sure that power to the recorder is turned on within one week after recording using a timer .

When the power is turned on, the recorded material is recorded to the MD. If power is not turned on over a period of time, the recorded contents may disappear. When this happens, “Initialize” flashes in the display when power is turned on.

Notes

•It may take about 30 seconds after the recorder is turned on until recording starts. When recording at a specified time using the timer, be sure to take this time into account when setting the recording start time.

•During timer recording, new material is recorded from the end of the recorded portion of the MD.

•Material recorded during timer recording will be saved to the disc the next time you turn on the recorder. “TOC Writing” will flash in the display at that time. Do not disconnect the power cord or move the recorder while the indication flashes.

•Timer recording will stop if the disc becomes full.

54

Page 53 Page 55
Image 54
Page 53 Page 55
Contents MDS-E12 For customers in the Europe For customers in CanadaOwner’s Record Precautions Handling MDsAbout This Manual Table of Contents Location and Function of Parts Front Panel Descriptions Rear of the Recorder Remote Descriptions @¼ Clear button ¥ M.SCAN button» Scroll button @Á x stop buttonDisplay Window Discriptions Using the Display Window When you insert an MDWhile the recorder is stopped While the recorder is recording While the recorder is playingE a M 2 Tr 1 m 2 5 s Getting Started After Unpacking Inserting batteries into the remoteHooking Up the Audio Components Getting Started Position of selector Output level ColdDa t e T i m e Y Y M M D D Setting the Clock0 0 7 1 2 1 9 0 Da t e T i m e D D Y Y Y YRecording on MDs Recording on an MDWhen Din Unlock flashes When you pause recordingWhen Protected is displayed When TOC indicator flashesRecording for long times Do steps 1 to 5 of Recording on an MD on Press MENU/NO twiceAdjusting the Recording Level P u t L e v e l A x 5 d BMonitoring the input signal Input Recording TipsErasing blank portions automatically Smart Space/Auto Cut Marking Track Numbers While Recording Track Marking Marking track numbers manually Manual Track MarkingMarking track numbers automatically Automatic Track Marking Do steps 1 to 7 of Recording on an MD on To stop Time Machine RecordingPress CD-SYNC Start Do steps 1 to 6 of Recording on an MD on Press Music SyncTo stop Music Synchro-recording If the CD player doesn’t start playingCD-SYNCHRO Start Press To change Change Recorder to CD player toPlaying MDs Operations you may want to do during play Press or turnPlaying MDs Playing a track by entering the track Number Z Playing a Specific TrackLocating a track with AMS To go to Do the followingReserving the next track during play Next Track Play X t N o N a m e 6 Tr 3 m 2 8 sLocating a Particular Point in a Track Locating a point while monitoring Sound SearchRepeating the current track Repeat 1 Play Z When the play mode is Recorder repeatsPlaying Tracks Repeatedly Repeat Play Repeating all the tracks on the MD Repeat All Play ZPlaying Tracks in Random Order Shuffle Play Z Continue playing the track or use M to locateTo stop Repeat A-B Play Programming the tracks 1 0 0 / 3 S 1 2 m 2 7 sCreating Your Own Program Program Play Checking the order of tracks Program1 - 6 Tr 3 m 2 8 s Multi-access Play1 - 0 Tr 0 m 0 0 s Storing the Located Track toM o r i z i n g M.ACCESS Multi-access play ZChecking the program To mark the desired point Mark Tr 0 m 0 0 s 0 0 fReturning to the Specified Point Locate Play Press AMS or YES Press MENU/NOH e a r s a l Pausing After Each Track Auto PauseFine adjusting the marked point Rehearsal 4 3 s 0 4 fMaking Track Play Start Soon Auto Cue Auto Pause and Auto Cue5 % D R E a M 2 Tr 4 m 0 9 s Changing Playback Speed Variable Speed PlayRAM editing and Disc editing Editing Recorded MDsBefore you start editing To select RAM editingAbout indication which appears during Editing Using buttons and control for editing OperationsErasing Tracks Erase About indications which appear after EditingErasing consecutive tracks Multitrack Erase Erasing all tracks on an MD ALL EraseErasing a portion of a track A-B Erase Example Erasing portion B2 of the second trackCombining consecutive tracks Multi track Combine Combining Tracks CombineCombining two tracks Combine Example combining the second track and fourth TrackMoving Tracks Move Example Moving the second track after the third trackDividing a track after selecting Dividing point Dividing Tracks DivideDividing a track after selecting a track Example Dividing the second trackNaming a Track or MD Name Naming a Track or MD using the controls On the recorderI n T r 2 To enter a spaceNaming a track or MD using the remote Z Copying names Name Copy Copying the same name to all tracks Disc. Name All CopyPress MENU/NO twice while the recorder is stopped Erasing all names on the MD Name All Erase Renaming a track or MD ZErasing a track or disc name Name Erase To rename a track or disc name, do the followingUndoing the Last Edit Undo Changing Recorded Level after Recording S.F EditChanging the level of a whole track During writing, press x Stop, MENU/NO or Clear To Use Fade In/Fade OutTo force a stop during writing Turn AMS until YES appears on the displayFade-in Play and Fade-in Recording Other FunctionsFade in and Fade Out Z Fade-out Play and Fade-out RecordingOther Functions Using a Timer Playing an MD using a timerRecording on an MD using a timer Remote Terminal Functions Rear Panel Terminal FunctionsControl terminal functions Control terminal CTRL-S Mini-jack typeCabling for Relay Relay Playback Relay RecordingParallel Input-Output Using Fader Play RS-232CSub 9-pin male Connecting a keyboard to the MD recorder Operating MD Recorder Using a KeyboardSetting the keyboard Selecting keyboard typeNaming a Track or MD Using the Keyboard Short cut to the naming procedureUsing the Edit Menu Operating the Recorder Through the Keyboard Operations using the US or JP keyboardsOperations using the 10-key pad Button or function KeyAssigning Characters to Keyboard Keys Assigning a characterClearing key assignments Keyboard Operations 10-Keyboard Layout Recorder Using a KeyboardKeyboard Operations English Keyboard Layout OperatingLimitations when recording over an existing track Additional InformationSystem Limitations Trouble shooting Guide to the Serial Copy Management SystemSelf-Diagnosis Function Message code Cause/RemedyDisplay Messages Message MeaningSpecifications Exterior dimensions Rack mountingSetting Setup Menu TableTo access the Setup Menu Menu item Function Parameters FactoryEdit Menu Table Last Mode MemoryTo access the Edit Menu Menu item Sub item Function
Related manuals
Manual 72 pages 13.5 Kb

MDS-E12 specifications

The Sony MDS-E12 is a notable addition to the Minidisc player lineup, reflecting Sony's commitment to innovation in the digital audio realm. Released in the late 1990s, this device was designed with a focus on high-quality audio playback and recording, making it a preferred choice for audiophiles and professionals alike.

One of the standout features of the MDS-E12 is its playback precision. Utilizing Sony's proprietary ATRAC (Adaptive TRansform Acoustic Coding) technology, the device processes audio with remarkable fidelity. ATRAC allows for efficient compression of audio files while maintaining impressive sound quality, making the MDS-E12 suitable for both casual listeners and serious music enthusiasts who demand clarity and rich soundscapes from their recordings.

In addition to its playback capabilities, the MDS-E12 also offers seamless recording features. Users can record live audio directly onto the Minidisc, capturing concerts, lectures, or personal performances with ease. The device supports both digital and analog input, allowing for versatile recording options from various audio sources. The built-in microphone input ensures that spontaneous recording is always an option.

Another highlight of the MDS-E12 is its user-friendly interface. The device includes a well-designed LCD display that provides essential information such as track numbers, play time, and remaining recording capacity. The intuitive layout of controls ensures that users can navigate easily through menus and settings, enhancing the overall user experience.

Moreover, the MDS-E12 incorporates a range of playback options. Users can enjoy repeat play, shuffle mode, and program play to customize their listening experience. The ability to label tracks enhances organization, allowing users to manage their collections effectively.

The Sony MDS-E12 is also built with durability in mind. Its robust design can withstand the rigors of daily use, catering to both home listeners and those on the go. The compact size of the device makes it portable, which is ideal for users who appreciate the flexibility of enjoying their audio on various occasions.

In terms of connectivity, the MDS-E12 features optical and coaxial digital outputs, as well as a headphone jack, making it straightforward to integrate with other audio equipment. Its performance, combined with comprehensive features and great sound quality, solidifies the Sony MDS-E12's place in the digital audio history, representing an era where Minidisc technology provided a fresh alternative to cassette tapes and CDs.
Top Page Image Contents