Toshiba 47LZ196, 42LZ196 manual Selecting stereo/SAP broadcasts, To listen to stereo sound

Reset

Done

StableSound

On

0

Balance

100

Treble

Bass

100

Audio Settings

5 To save the new settings, highlight Done and press T. To reset the settings to the factory defaults, highlight Reset and press T.

Using the StableSound® feature

The StableSound® feature limits the highest volume level to prevent extreme changes in volume when the signal source changes (for example, to prevent the sudden increase in volume that often happens when a TV program switches to a commercial).

To turn on the StableSound® feature:

• c makes the bass or treble stronger or increases the balance in the right channel (depending on the item selected).

• C makes the bass or treble weaker or increases the balance in the left channel (depending on the item selected).

Audio Settings

To listen to an alternate language on an ATSC digital station (if available):

Highlight the Language field in step 3 at left, and then press C or c to select the language you prefer.

Adjusting the audio quality

You can adjust the audio quality by adjusting the bass, treble, and balance.

To adjust the audio quality:

1 Press Yand open the Audio menu.

2 Highlight Audio Settings and press T.

3 Press b or B to highlight the item you want to adjust (Bass, Treble, or Balance).

Reset

Done

StableSound

Off

0

Balance

100

Treble

100

Bass

Chapter 5: Using the TV’s features

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows you to output high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language, music, or other audio information (when provided by individual stations).

When the TV receives a stereo or SAP broadcast, the word “STEREO” or “SAP” appears when Eis pressed. The MTS feature is not available when the TV is in VIDEO mode.

To listen to stereo sound:

1 Press Yand open the Audio menu.

2 Highlight Audio Setup and press T.

			Audio
			Audio Settings
			Advanced Audio Settings
3 In the MTS			Audio Setup
		field, select Stereo.
								4 Press C or c to adjust the level.
	Audio Setup
		MTS				Stereo
		Language				English
		Speakers					On
		Optical Output Format			Dolby Digital
		Dolby Digital			Compressed
		Dynamic Range Control
				Reset	Done

4 To save the new settings, highlight Done and press T. To reset the settings to the factory defaults, highlight Reset and press T.

Note:

•You can typically leave the TV in Stereo mode,

because it will automatically output the type of sound being broadcast (stereo or monaural).

•If the stereo sound is noisy, select Mono to reduce the noise.

To listen to a second audio program on an analog station (if available):

Select SAP in step 3 above.

Note:		1	Press Yand open the Audio menu.
•	A second audio program (SAP) can be heard only on those
		2	Highlight Audio Settings and press T.
	TV stations that offer it. For example, a station might
	broadcast another language as a second audio program. If	3	In the StableSound field, select On.
	you have SAP on, you will see the current program on the
	screen but hear the other language instead of the program’s
	normal audio.
•	If you have SAP on and the station you are watching is not
	broadcasting a second audio program, the station’s normal
	audio will be output. However, occasionally there is no
	sound at all in SAP mode. If this happens, set the MTS
	feature to Stereo mode.

44