Toshiba 65HT2U Using the Freeze feature, Adjusting the picture, Selecting the picture mode

Chapter 6: Using the TV’s features

Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only)

You can set separate scroll settings for the TheaterWide 2 and TheaterWide 3 modes for each input.

To set the scroll settings:
1無 Press	and open the Picture menu.
2無 Highlight Theater Settings and press		.

3無 In the Picture Size field, select either TheaterWide 2 or TheaterWide 3 (you cannot scroll in any other mode).

4無 Press  to highlight the Picture Scroll field.

5無 Press  or  to scroll the picture up and down as needed.

6無 To save the new settings, highlight Done and press

. To revert to the factory defaults, highlight Reset and press .

Note: When receiving a signal at 480i resolution, the picture scroll function may have limited adjustment range.

Using the auto aspect ratio feature

When the auto aspect ratio feature is set to On, the TV will automatically select the picture size when one of the following input sources is received:

•A 480i, 480p, 720p, 1080i digital signal from the

ANT/CABLE input

•A 480i signal from the VIDEO input

•A 480i signal from the ColorStream HD input

•A 480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal from the HDMI 1, HDMI 2, and HDMI 3

Aspect ratio of signal	Automatic aspect size (automatically
source	selected when Auto Aspect is On)
4:3 normal	4:3
4:3 letter box	TheaterWide 2
16:9 full	Full
Not defined (no ID-1	The current picture size you set under
data or HDMI aspect	“Selecting the picture size” on page
data)	32

Note: The auto aspect ratio feature is not applicable to PC input.

To turn on the auto aspect ratio feature:

1無 Press	and open the Picture menu.
2無 Highlight Theater Settings and press			.
3無 In the Auto Aspect Ratio field, select On.
4無 To save the new settings, highlight Done and
press	. To revert to the factory defaults,
highlight Reset and press		.

To turn off the auto aspect ratio feature:

Select Off in Step 3 above.

Using the FREEZE feature

To use the FREEZE feature:

1無 When viewing the TV, press to make the picture a still picture.

2無 To return to the moving picture, press again (or any other button).

Note: If the TV is left in FREEZE mode for more than 15 minutes, the FREEZE mode will automatically be released and the TV will return to moving picture.

Using the FREEZE function for any purpose other than your private viewing may be prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from four different modes, as described below.

Mode	Picture Quality
Sports	Bright and dynamic picture (factory
	setting)
Standard	Standard picture settings (factory setting)
Movie	Lower contrast for darkened room
	(factory setting)
PC	Designed for viewing of PC tables and
	documents
Preference	Your personal preferences

Note: PC mode is available for HDMI and PC inputs only (grayed out for other input sources).

(continued)

34