Toshiba 65HT2U owner manual Digital CC Settings, CC Selector, To customize the closed captions

Chapter 6: Using the TV’s features

•To view text:

Highlight T1, T2, T3, or T4.

Note: If text is not available in your area, a black rectangle may appear on screen. If this happens, set the Base CC Mode to Off.

•To turn off the closed caption mode: Select Off in Step 2 above.

Note: A closed caption signal may not display in the following situations:

••When a videotape has been dubbed

••When the signal reception is weak

••When the signal reception is non-standard

Digital CC Settings

You can customize the closed caption display characteristics by changing the background color, opacity, text size, type, edge, and color.

Note:

••This feature is available for digital channels only.

••You cannot set the Caption Text and Background as the same color.

To customize the closed captions:

1無 Press and open the Preferences menu.

2無 Highlight Digital CC Settings and press .

3無 Press  or  to highlight the characteristic you want to change, and then press  or  to select the format for that characteristic (see table below).

4無 To save the new settings, highlight Done and press

. To revert to the factory defaults, highlight Reset and press .

Caption Size	Auto, Small, Standard, Large
	Auto, Default, Mono w. Serif,
Caption Text	Prop. w. Serif, Mono w/o
Type	Serif, Prop. w/o Serif, Casual,
	Cursive, Small Capitals
	Auto, None, Raised,
Caption Text	Depressed, Uniform, Left
Edge	Drop Shadow, Right Drop
	Shadow
Caption Text	Auto, Black, White, Red,
	Green, Blue, Yellow, Magenta,
Color
	Cyan
Text Foreground	Auto, Transparent,
Opacity	Translucent, Flashing, Solid
Background	Auto, Black, White, Red,
	Green, Blue, Yellow, Magenta,
Color
	Cyan
Text Background	Auto, Transparent,
Opacity	Translucent, Flashing, Solid
Caption Text	Auto, Black, White, Red,
	Green, Blue, Yellow, Magenta,
Edge Color
	Cyan

CC Selector

You can use the CC Selector to temporarily override the default analog caption mode (set in Base CC Mode) for a particular channel. However, once you change to another analog channel, the closed caption setting will automatically change back to the current

Base CC Mode setting.

You can also use the CC Selector to select digital closed caption services (if available). When such services are not available, the CC Selector presents a default list of services. If the selected service is not available, the next best service will be used instead.

To select closed captions:

1無 Press and open the Preferences menu.

2無 Highlight CC Selector and press .

3無 Press  or  to select Closed Caption, and then press  or  to select the desired service.

4無 Press .

36