Grounding, Electrical Code, ANSI/NFPA | Toshiba 84LM9600 guide

4	IMPORTANT SAFETY INSTRUCTIONS

•	Warning- To reduce the risk of fire or
	electrical shock, do not expose this product
	to rain, moisture or other liquids. Do not
	touch the TV with w et hands. Do not install
	this product near flammable objects such
	as gasoline or candles, or expose the TV to
	direct air conditioning .

•	Do not expose to dripping or splashing and
	do not place objects filled with liquids, such
	as vases, cups, etc. on or over the apparatus
	(e.g. on shelves above the unit).

•	Grounding
	(Except for devices which are not grounded )
	Ensure that you connect the earth ground
	wire to prevent possible electric shock
	(i.e a TV with a three-prong grounded AC
	plug must be connected to a three-prong
	grounded AC outlet). If grounding methods
	are not possible, have a qualified electrician
	install a separate circuit breaker. Do not try	to
	ground the unit by connecting it to telephone
	wires, lightening rods, or gas pipes.

•As long as this unit is connected to the AC wal l outlet, it is not disconnected from the AC power source even if the unit is turned off.

•	Do not attempt to modify this product in any
	way w ithout written authorization from LG
	Elect ronics. Unauthorized modification cou ld
	void the user'sauthority to operate this
	product.
•	ANTENNAS Outdoor antenna grounding
	(Can differ by country):
	If an outdoor antenna is installed, follow
	the precautions below. An outdoor antenna
	system should not be located in the vicin ity
	of overhead power lines or other electric light
	or power circuits, or whe re it can come in
	contact with such power lines or circuits as
	death or serious injury can occur. Be sure the
	antenna system is grounded so as to provide
	some protection against voltage surges
	and built-up static cha rges. Section 810 of
	the National Electrical Code (NEC) in the
	U.S.A. provides information with respect to
	proper grounding of the mast and supporting
	structure, grounding of the lead-in wire to
	an antenna discharge unit, size of grounding
	cond uctors, location of antenna discharge
	unit, connection to grounding electrodes and
	requirements for the grounding electrode .
	Antenna grounding according to the National
	Electrical Code, ANSI/NFPA 70

•	DISCONNECTING DEVICE FROM THE MAIN
	POWER
	M ains plug is the disconnecting device. The
	plug must rema in readily operable.

Ante nna Lead in Wire

Ante nna D ischarge U nit (NEC Section 8 10-20)

Grounding Cond ucto r (NEC Section 810-21)

Powe r Service G rounding Electr od e System

(NEC Art 250, Pa rt H)

Grounding