Toshiba MV19N3C, MV13N3C Auto Clock Setting, Auto Clock Adjustment, To SET Auto Clock to OFF

Page 17

AUTO CLOCK SETTING

The Auto Clock function will automatically set the built-in clock (Month, Day, Year and Time) when the TV/VCR is connected to an Antenna or Cable system and it is turned off. As the TV/VCR searches for a receivable station in your area and it receives a broadcast signal for Auto Clock, the Auto Clock needs several minutes to set itself.

AUTO CLOCK SETTING

1.Connect the Antenna or Cable system.

•If you use a cable box, turn it on.

2.Plug the AC Power cord to the AC outlet.

3.Make sure the TV/VCR is turned off.

•If you press the POWER button, the Auto Clock set is not effective.

4.Wait at least three minutes and press the POWER button.

5.Press the CALL button to check the clock on the screen.

6.If the clock is not set, check the Antenna condition. The Auto Clock may not function properly if the reception condition is not good.

AUTO CLOCK ADJUSTMENT

The Auto Clock Adjustment will be performed at 12:00 PM everyday if you turn off the TV/VCR.

•If you use a cable box and you want Auto Clock adjustment to be performed, the cable box must be left on.

•The Auto Clock Adjustment is not effective when there is a difference of more than 5 minutes exists between the built-in clock time and the actual time.

TO SET AUTO CLOCK TO OFF

When shipped from factory the AUTO CLOCK option is set to ON.

But if you do not want Auto Clock set (Adjustment):

1.Turn on the TV/VCR.

2.Press the MENU button.

3.Press the SET/TR + or – button to select the SYSTEM SETUP option, then press the ENTER button.

4.Press the SET/TR + or – button to select the AUTO CLOCK option.

5.Press the ENTER button to select OFF.

6.Press the MENU button repeatedly to return to the normal screen.

•When the AUTO CLOCK is set to OFF, the Auto Clock adjustment does not function.

•Set the clock manually (see page 17).

TO SET STANDARD TIME

In the rare event that you live within broadcast range of two stations in two different time zones, the TV/VCR may recognize the wrong station for the Auto Clock set.

To correct the situation:

1.Press the MENU button.

2.Press the SET/TR + or – button to select the SYSTEM SETUP option, then press the ENTER button.

3.Press the SET/TR + or – button to select the STANDARD TIME option, then press the ENTER button.

4.Press the SET/TR + or – button to select your time zone, then press the ENTER button.

ATLANTIC

:

GMT – 4

hours

(GMT: Greenwich Mean Time)

EASTERN

:

GMT – 5

hours

 

CENTRAL

:

GMT – 6

hours

 

MOUNTAIN

:

GMT – 7

hours

 

PACIFIC

:

GMT – 8

hours

 

ALASKA

:

GMT – 9

hours

 

HAWAII

:

GMT – 10 hours

 

AUTO

:

AUTO SET

 

 

5. Press the MENU button twice to return to the normal screen.

NOTES: • To be able to select the standard time, the clock must first be set by “AUTO CLOCK” once.

•If you live in Newfoundland and the Auto Clock does not function properly, set the AUTO CLOCK menu option to OFF and set the clock manually.

ENGLISH

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents MV13N3C MV19N3C TV/CATV Mode Selection Selection DU Mode TV/CATVEnglish Accessories CleaningPower Source Grounding or Polarization Read InstructionsPower Lines POWER-CORD ProtectionReplacement Parts LightningNEC Section Safety CheckFeatures Table of Contents When YOU Experience the Above Conditions Safety PrecautionsMoisture Condensation Moisture will Condense on the Unit in the Following CasesWider Hole and Blade AC Outlet Power SourceTo USE AC Power Front Rear Location of ControlsDescription of Controls FrontRemote Control Battery Precautions Battery InstallationEffective Distance of the Remote Control FeetAntenna Jack Combiner VHF 75 ohm UHF 300 ohm Antenna ConnectionsIndoor Antenna not Supplied Cable TV Connections For Subscribers to Basic Cable TV ServiceFor Subscribers to Scrambled Cable TV Service Setting the Language Auto Clock Setting Auto Clock SettingAuto Clock Adjustment To SET Auto Clock to OFFMenu button until the Menu screen is cleared Daylight Saving Time SettingTo move cursor backward, press the Cancel button Manual Clock SettingButton Then press the Enter buttonVHF/UHF/CATV Channels TV OperationReal Time Tape Counter Channel + MuteCall Closed Caption SleepChannel Return SleepTo View Closed Captions What is Closed CAPTIONING?Closed Captioning with a VCR TV/CATV Selection To Memorize ChannelsScreen is cleared Automatic Memory TuningTo ADD/DELETE Channels Picture To SET the on TimerImernrecset To SET the OFF TimerContrast Picture Control AdjustmentsBrightness Sharpness CancelColor Tint Loading and Unloading a Video Cassette Automatic Power on and PlayLoading UnloadingTape Speed and Maximum PLAYBACK/RECORDING Time To Prevent Accidental Erasure To Record AgainTo Stop Playback PlaybackTo Start Playback FORWARD/REVERSE Picture Search To Rewind or Forward the Tape RapidlyDigital Tracking Controls To Visually Search for Desired Points Special PlaybackSpeed Search Times To Watch Still PictureTo Watch a Tape Repeatedly Repeat mode is canceledAuto Repeat option PositionRecording and Viewing the Same TV Program Recording a TV ProgramBe recorded Example Channel Screen and the REC indicator will lightTo Stop Recording To Stop Recording Temporarily ONE-TOUCH Timer Recording OTR Date, then press the Enter button Timer RecordingProgram position, then press the Enter Program To Cancel a Program Other Functions for the Timer RecordingTo SET DAILY/WEEKLY Timer To Confirm the SettingsTo View the Counter Display Using the Real Time Tape CounterPress the Call button Counter toUsing Zero Return Connection to Camcorder Duplicating a Video TapeConnection to Another VCR Symptom Cause Possible Solution Power Problem and Troubleshooting GuideNo power TV Broadcast ReceptionRemote Control Symptom Cause Possible SolutionRecording PlaybackReception Disturbances Video Head Clogging Video Head CleaningVideo Head Cleaning Limited Ninety 90 Day Warranty 808 Toshiba Hawaii, IncKamakee Street J5E20501A U 02/12
Top Page Image Contents