Toshiba MV19N3C, MV13N3C owner manual Program

5 Set the start time, end time, channel and tape speed as in step 4.

	TIMER REC SET	23TH700PM930PM007SLP
SET/TR	ENTER

DATE	23	(THU)	------:---:------
START	7	: 00 PM	·+/–/ENTER/CANCEL/MENUÒ
END	9	: 30 PM
CH	007
SPEED	SLP
〈+/–/ENTER/CANCEL/MENU〉

ENGLISH

5

PROGRAM	VOL
	–

MENU
–
SET/TR	+

CH+

7 CALL

0 TRACKINGDIGITAL

ENTER

	CLOSED
	CAPTION	SLEEP
1
4	2
		3		POWER
5			INPUT
8	6			SELECT
		SKIP
9			SEARCH
CHANNEL	RESETCOUNTER
RETURN
CANCEL	RETURN
	ZERO
MUTE
SP/SLP

EJECT

		CH
	REC	–
REW	P	RECTIMER
	LAY
STOP	FF

VOL+

PAUSE/STILL

7

6	To set the timer for another program, press the
	SET/TR + or – button until the number of the
	second program blinks, then press the ENTER
	button. Repeat steps 4 to 5 to set the second
	program.

4

5

7	Press both the TIMER REC buttons at the same
	time. The TIMER REC indicator will light. The
	Timer is programed, when the programed time is
	reached, the recording is automatically started.

TIMER

REC

TIMER REC

To cancel timer recording, press both the buttons again and TIMER REC indicator will go off.

NOTES: • The VCR section cannot be used while the TIMER REC indicator is lit. If you want to use the VCR operation, press both the TIMER REC buttons at the same time to deactivate the timer.

•After a power failure or disconnection of the power plug, all programed recording setting and time display will be lost upon resumption of power. In this case, reset the clock (see pages 15-17) and reprogram any timer recordings.

•If you want to correct the digits while setting, press the CANCEL button until the item you want to correct, then

press the SET/TR + or – button to correct the desired setting. 39