Toshiba 42XV540U, 52XV540U, 46XV540U To view antenna or Cable channels, To view the DVD player

Chapter 2: Connecting your TV

Connecting a DVD player with ColorStream® (component video), a VCR, and a satellite receiver

Your TV has two sets of ColorStream® (component video) inputs.

		AUDIO
		OUT
Y	PB	L
		PR

COMPONENT VIDEO S-VIDEO VIDEO R

OUT OUT

DVD player with component video

From satellite dish

				AUDIO
				OUT
Y	PB	PR		L
Satellite	COMPONENT VIDEO		S-VIDEO VIDEO	R
IN			OUT OUT

TV upper back panel

		From antenna
Stereo VCR
VIDEO	AUDIO
L	R
	IN	IN from ANT
		CH 3
		CH 4
	OUT	OUT to TV
	L R

Satellite receiver with component video TV lower back panel

You will need:

•coaxial cables

•standard A/V cables

–For better picture performance, if your VCR has S-video, use an S-video cable (plus the audio cables) instead of the standard video cable. Do not connect both types of video cable to VIDEO 1 at the same time or the picture performance will be unacceptable.

–If you have a mono VCR, connect L/MONO on the TV to your VCR’s audio out terminal using the white audio cable only.

•standard audio cables

•component video cables

–You can connect the component video cables (plus audio cables) from the DVD player or satellite receiver to either set of ColorStream terminals on the TV (HD1 or HD2). The ColorStream HD1 and HD2 terminals can be used to display Progressive (480p, 720p) and Interlaced (480i, 1080i). Please check the Owner’s Manual of the DVD player or satellite in order to determine the best output signal available (1080p is not supported).

–If your DVD player or satellite receiver does not have component video, connect a standard A/V cable to VIDEO 2 on the side panel. If your DVD player has HDMI video, see page 16.

To view antenna or Cable channels:

Select the ANT/CABLE video input source on the TV.*

To view the DVD player:

Turn ON the DVD player. Select the ColorStream HD1 video input source on the TV.*

To view satellite programs using the component video connections:

Turn on the satellite receiver. Select the ColorStream HD2 video input source on the TV.*

To view the VCR or view and record antenna channels:

Turn ON the VCR. Tune the VCR to the channel you want to watch. Select the VIDEO 1 video input source on the TV.*

To record a TV program while watching a DVD:

Turn ON the VCR. Tune the VCR to the channel to record. Select the ColorStream HD1 video input source on the TV* to view the DVD.

*To select the video input source, press INPUT on the remote control (- page 21). To program the TV remote control to operate other devices, see Chapter 3.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

14