Toshiba 42XV540U, 52XV540U, 46XV540U manual Appendix, Specifications

Page 68

Chapter 9: Appendix

Specifications

Note:

This model complies with the specifications listed below.

Designs and specifications are subject to change without notice.

This model may not be compatible with features and/or specifications that may be added in the future.

Television System

NTSC standard

ATSC standard (8VSB)

Digital Cable (64 QAM, 256 QAM; in-the-clear, unencrypted)

Channel Coverage

VHF: 2 through 13

UHF: 14 through 69

Cable TV: Mid band (A-8 through A-1, A through I) Super band (J through W)

Hyper band (AA through ZZ, AAA, BBB) Ultra band (65 through 94, 100 through 135)

Power Source: 120 V AC, 60 Hz

Power Consumption

42XV540U: 2.0 Arms (maximum current)

0.3W in standby mode

46XV540U: 2.6 Arms (maximum current)

0.3W in standby mode

52XV540U: 3.0 Arms (maximum current)

0.3W in standby mode

Audio Power: 10 W + 10 W

Speaker Type

Two 1-3/8 × 6-3/8 inches (35 × 160 mm)

Video/Audio Terminals

S-VIDEO INPUT:

Y:1 V(p-p), 75 ohm, negative sync.

C:0.286 V(p-p) (burst signal), 75 ohm

VIDEO/AUDIO INPUT:

VIDEO: 1 V(p-p), 75 ohm, negative sync.

AUDIO: 150 mV(rms) (30% modulation equivalent, 22 k ohm or greater)

ColorStream® (component video) HD INPUT: VIDEO:Y: 1V(p-p), 75 ohm

PR: 0.7 V(p-p), 75 ohm

PB: 0.7 V(p-p), 75 ohm

Suggested formats: 1080i, 720p, 480p, 480i AUDIO: 150 mV(rms), 22 k ohm or greater

HDMI™ INPUT:

HDMI compliant (type A connector) HDCP compliant

Audio Lip Sync supported

Deep Color supported (10 bit 4:4:4, 12 bit 4:4:4) x.v.Color supported

Suggested formats: See table on the next page.

HDMI Audio: 2-channel Linear-PCM; 32/44.1/48 kHz sampling frequency; 16/20/24 bits per sample

FIXED AUDIO OUTPUT:

150 mv (rms) (30% modulation equivalent, 2.2 k ohm or less)

DIGITAL AUDIO OUTPUT:

Optical type

IR OUT:

3 V(p-p), 3.5 mm mono socket

PC INPUT:

15-Pin D-sub Analog RGB

Dimensions

42XV540U: Width: 39-3/4 inches (1,009 mm) Height: 27-3/8 inches (694 mm) Depth: 12-1/4 inches (308 mm)

46XV540U: Width: 43-5/8 inches (1,108 mm) Height: 29-3/8 inches (746 mm) Depth: 12-1/4 inches (308 mm)

52XV540U: Width: 49-3/8 inches (1,252 mm) Height: 33 inches (837 mm) Depth: 14-1/2 inches (368 mm)

Mass (weight)

42XV540U: 56.7 lbs (25.7 kg)

46XV540U: 65.0 lbs (29.5 kg)

52XV540U: 87.7 lbs (39.8 kg)

Operating conditions

Temperature: 32ºF - 95ºF (0ºC - 35ºC)

Humidity: 20 - 80% (no moisture condensation)

Supplied Accessories

Remote control with two size “AA” alkaline batteries

Owner’s manual (this book)

Securement Clip

Use this clip to attach the TV to a wall stud, pillar, or other immovable structure. See item 20 on page 3 and instructions on page 5.

Cleaning cloth (to clean the cabinet and control panel)

68

Image 68
Contents 42XV540U 46XV540U 52XV540U Safety Precautions IssueTune Into Safety Dear CustomerImportant Safety Instructions Installation, Care, and ServiceAdditional Safety Precautions InstallationService CareTo Display your LCD TV using a Wall Bracket Choosing a location for your LCD TVTo Display your LCD TV on the included Pedestal Stand Removing the Pedestal StandTrademark Information PartImportant notes about your LCD TV Contents Troubleshooting Introduction Features of your new TVFor details on using the TV’s features, see Chapters 6 Green and Yellow LEDs TV front and side panel controls and connectionsEffective range TV back panel connections Colorstream HD1 and Colorstream HD2About the connection illustrations Connecting your TVOverview of cable types To view the antenna or Cable signal You will needTo view basic and premium Cable channels To view the VCRTo view antenna or Cable channels To view the DVD playerTo view the VCR or view and record antenna channels To record a TV program while watching a DVDIf you cannot locate the device’s infrared sensor To connect the IR blaster cableTo control the devices Connecting an Hdmi or DVI device to the Hdmi input To connect an Hdmi device, you will needTo view the Hdmi device video To connect a DVI device, you will needHdmi cables REGZA-LINK connectionBefore controlling the devices Standard audio cables Connecting an audio systemTo control the audio Connecting a personal computer PC SignalTo connect a PC to the PC in terminal on the TV To connect a PC to the Hdmi terminal on the TVUsing the remote control Preparing the remote control for useInstalling the remote control batteries If you have a Toshiba deviceTV until the keypad blinks 3 times to control the TV Mode Select sets the five remote control device modesTV, CABLE/SAT, HD DVD, DVD, and VCR/PVR. Press Remote Control functional key chart PVR= key does not send a signal in that remote control mode Using the remote control to operate your other devices Device code setupMode Select Default device mode control before programming Mode Select Device mode control after programmingUsing the volume lock feature Operational feature resetTo unlock the remote control’s volume keys To reset the remote controlSatellite receivers TVsCable boxes DVDs 3D LABVCRs HD DVDsDVD/VCR Combo KEC STS PVRs Cable/PVR ComboDBS/PVR Combo Audio AmpAudio Amp/Tuners SAESetup/Installation menu layout Menu layout and navigationMain menu layout Thinc menuNavigating the menu system ApplicationsSelecting the menu language Setting up your TVSetting the Demo Mode Configuring the input source for the ANT/CABLE terminal To configure the ANT/CABLE input sourceProgramming channels automatically To program channels automaticallySetting the Auto Input feature Manually adding and deleting channels in the channel memoryLabeling channels Setting the time zone Setting the Hdmi audio modeViewing the digital signal meter Selecting the Power-On Mode Selecting the Demo ModeReset Factory Defaults Viewing the system statusTo label the video input sources Using the TV’s featuresLabeling the video input sources Favorites Browser Tuning channelsTuning channels using Channel Browser Elements of the Channel Browser Setting the Channel Tuning Mode Tuning to the next programmed channelTuning to a specific channel programmed or unprogrammed Adding and clearing channels and inputs in the History ListSwitching between two channels using Channel Return Switching between two channels using SurfLockTo select the picture size using the remote control To select the picture size using the menusPicture Size Natural TheaterWide For 43 format programsTheaterWide For letter box programs TheaterWide For letter box programs with subtitlesUsing the auto aspect ratio feature To set the scroll settingsTo turn on the auto aspect ratio feature To turn off the auto aspect ratio featureUsing the Freeze feature Adjusting the pictureSelecting the picture mode Adjusting the picture qualityBase closed captions Using the TheaterLock featureUsing the closed caption mode Adjusting the audio Digital CC SettingsUsing the Closed Caption button on the remote control CC SelectorSelecting stereo/SAP broadcasts Using the digital audio selectorAdjusting the audio quality Using the Locks menu Using the StableSound featureUsing the Dolby Digital Dynamic Range Control feature Entering the PIN codePress b to highlight Enable Rating Blocking If you cannot remember your PIN codeChanging your PIN code Blocking TV programs and movies by rating V-ChipTo download the additional rating system if available Using the input lock feature Using the GameTimerBlocking channels Unlocking programs temporarilyUsing the PC settings feature Using the control panel lock featureTo adjust the PC settings To lock the control panelSetting the PC Audio Setting the sleep timerUsing REGZA-LINK REGZA-LINK playback device HD DVD player, etc. controlVolume and Mute controls of Audio Receiver REGZA-LINK input source selectionOther REGZA-LINK functions REGZA-LINK Player Control menu functionsTo set the Hdmi Settings Using the Hdmi settings featureTo set the REGZA-LINK Setup Understanding the auto power off feature Understanding the last mode memory featureTo display TV status information using Recall To display TV status information using InfoUsing the TV’s advanced features Using the advanced picture settings featuresUsing dynamic contrast Using the static gamma featureUsing CableClear digital noise reduction Using the ClearFrame featureUsing the Film Stabilization feature Using Color Palette Adjustment Using Mpeg noise reductionUsing the ColorMaster feature Using the advanced audio settings features Using x.v.Color Selection featureUsing the Game Mode feature Using the surround sound featuresTroubleshooting General troubleshootingRemote control problems Channel tuning problemsClosed caption problems Rating blocking V-Chip problemsLED indications Specifications Appendix1280 60.020Hz 63.981kHz 108.000MHz Acceptable signal formats for PC in and Hdmi terminalsFormat Resolution Frequency Pixel Clock Frequency Limited United States Warranty For LCD Televisions 26 and LargerLimited Canadian Warranty For Toshiba Brand Flat Panel TelevisionsDisclaimer and Limitation of Remedy Index Freeze08-03