CHANNEL PRESET
Presetting channel
•First, use the ASM (Automatic Search Memory) function to preset all active channels in your area automatically. Refer to step 5 of “GETTING STARTED”, page 5.
Then, arrange the preset channels with the SEARCH, SKIP and MFT (Manual Fine Tuning) functions so that you can tune into only desired channels.
•Use the SEARCH function if desired channels cannot be preset with the ASM or if you would like to preset channels to specific position numbers one by one.
To use the SEARCH function
1 | Press MENU and then ; | |
| the “ TUNING” icon. | |
| TUNING |
|
| MFT | ON |
| AFT | |
| ASM |
|
| SEARCH | P001 |
| POSITION | |
| MEMORY |
|
| SELECT / | MENU |
2Press CH s/t to select “SEARCH”. Press
;
4Press CH s/t to select “MEMORY”, then press ;+ to memorize the channel at the current position.
TUNING |
|
|
MFT |
| OFF |
AFT |
| |
ASM |
|
|
SEARCH |
| P002 |
POSITION |
| |
MEMORY |
|
|
SELECT / | ADJUST | BACK MENU |
5When you program other channels, repeat steps 2 to 4.
To skip a position number
After presetting the channels, you may skip unnecessary position numbers so that only the channels you want to watch are selected using CH s/t.
1First, select the position number to be skipped with CH s/t or digit selection and number buttons
2Highlight the “
SET UP” icon and press CH s/t to select “SKIP”.
SETUP |
| ENGLISH | |
LANGUAGE |
| ||
COLOR MODE |
| AUTO | |
SOUND MODE |
| B/G | |
SKIP |
|
| ON |
BLUE SCREEN |
| ON | |
TEXT |
|
| FAST |
SELECT / | ADJUST | BACK MENU | |
TUNING |
|
|
MFT |
| ON |
AFT |
| |
ASM |
|
|
SEARCH |
| P001 |
POSITION |
| |
MEMORY |
|
|
SELECT / | ADJUST | BACK MENU |
SEARCH | VHF H | P001 |
STOP
3Press ;
Repeat this process until you can get the desired channel.
3When the desired channel is shown, press CH t to select “POSITION”. Press ;
TUNING |
|
|
MFT |
| OFF |
AFT |
| |
ASM |
|
|
SEARCH |
| P002 |
POSITION |
| |
MEMORY |
|
|
SELECT / | ADJUST | BACK MENU |
13
13 | 23/9/05, 9:27 AM |