Using the TV’s features
Activating the black stretch
This function increases the strength of dark areas of the picture which improves definition.
1From the Picture settings menu, press u or U to select Black stretch on the 2nd page.
Picture settings | 2/2 | |
|
|
|
Black stretch |
| On |
|
| |
MPEG NR |
| Low |
|
| |
DNR |
| Auto |
|
|
|
Color Temperature |
| Cool |
|
|
|
MENU Back EXIT Watch TV |
| |
2Press I or i to select On or Off.
Black stretch | On |
|
Note:
In the PC input mode (- page 21), this mode is not available.
Activating the MPEG NR (Noise Reduction)
If the receiving signal of MPEG is a mosquito (grained) noise depending on the compression and conversion, the noise may be reduced when using this function.
1From the Picture settings menu, press u or U to select MPEG NR on the 2nd page.
2Press I or i to select Off, Low, Middle or High.
MPEG NR | High |
|
Note:
In the PC input mode (- page 21), this mode is not available.
Activating the DNR (Digital Noise Reduction)
If the receiving signal is weak and the picture is blurry, the picture may be improved when using this function.
1From the Picture settings menu, press u or U to select DNR on the 2nd page.
2Press I or i to select Auto, Off, Low, Middle or High.
DNR | Auto |
|
Note:
This function is available for 480i and 576i signals.
Selecting the color temperature
You can change the tone of the picture by selecting from three preset color temperatures: Cool, Normal or Warm.
1From the Picture settings menu, press u or U to select
Color Temperature on the 2nd page.
2Press I or i to select mode you prefer.
Color Temperature | Cool |
|
Cool: Lends a blue hue to the picture.
Normal: Neutral
Warm: Lends a red hue to the picture.
Adjusting the color management
You can adjust the picture color quality by selecting from 6 base color adjustments : Red, Green, Blue, Yellow, Magenta or Cyan.
1Press M, then press I or i to display the PICTURE menu.
2Press u or U to select 3D Color management, then press I or i, then press I or i to select On.
3D Color management | On |
|
3Press Q, then press u or U to select Base color adjustment.
4Press Q, then press u or U to select an item you want to adjust.
5Press i, then press I or i to select Hue, Saturation or
Brightness.
Base color adjustment
|
| Hue | Saturation | Brightness |
| Red | 0 | 0 | 0 |
|
|
|
|
|
| Green | 0 | 0 | 0 |
|
|
|
|
|
| Blue | 0 | 0 | 0 |
|
|
|
|
|
| Yellow | 0 | 0 | 0 |
|
|
|
|
|
| Magenta | 0 | 0 | 0 |
|
|
|
|
|
| Cyan | 0 | 0 | 0 |
Reset |
|
| OK | |
|
|
|
|
|
MENU Back | EXIT Watch TV |
| ||
6Press u or U to adjust the settings as required.
|
| Hue | Saturation | Brightness | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| Red | 0 | 0 |
| 0 |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Notes:
•If you select color management Off mode, this mode is not available.
•In the PC input mode (- page 21), this mode is not available.
Resetting the base color adjustment
The Reset function adjusts the base color adjustment to the factory settings.
1From the Base color adjustment menu, press u or U to select Reset.
2Press Q.
17