6-21
Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-8241-02
Chapter6 Configuring the Internet Protocol
Showing IP Configuration Information
Resetting IP Statistics
To set the global IP (TCP/UDP) statistics for the CSS to zero, use the zero ip
statistics command in any mode. This command sets the TCP/UDP statistics
displayed by the show ip statistics command to zero. For more information about
the show ip statistics command, see the “Showing IP Statistics” section.
Showing a Summary of IP Global Statistics
Use the show ip summary command to display a summary of IP global statistics.
The statistics include data on reachable and total routes, reachable and total hosts,
memory in use for each, and total IP routing memory in use.
Table 6 -6 describes the fields in the show ip summary command output.
Duplicate Addr The number of received ARP packets with a detected
duplicate IP address. The duplicate IP address can be
the local IP address, VIP, or virtual interface.
Invalid The number of invalid or bad ARP packets.
Replies In The number of received ARP reply packets.
Replies Out The sending ARP reply packet count.
In Off Subnet The number of received ARP packets with sender or
target addresses outside of the subnet range of the
receiving interface.
Unresolved The number of processed IP frames with unresolved
next hop MAC addresses.
Table6-5 Field Descriptions for the show ip statistics Command (continued)
Field Description