3-35
Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-8241-02
Chapter3 Configuring Open Shortest Path First
Showing OSPF Information
To show the entire database, enter:
# show ospf lsdb
Table 3 -6 describes the fields in the show ospf lsdb command output.
Table3-6 Field Descriptions for the show ospf lsdb Command
Field Description
Area The ID for the area.
Type The link-state type. The types are as follows:
•ASB-Summary for summary LSAs originated by
ABRs. The LSAs describe routes to ASBRs.
•ASE for AS-external LSAs that describe routes to
destinations external to the autonomous system.
•Network for the network LSAs that describe the set of
routers attached to the network.
•Router for router LSAs that describe the collected
states of the router interfaces.
•Summary-Net for summary LSAs originated by ABRs.
The LSAs describe routes to networks.
Link State ID This field identifies the piece of the routing domain that is
being described by the LSA. Depending on the link-state
type, the Link State ID has following values:
•For the ASB-Summary type, the ID is the router ID of
the ASBR.
•For the ASE type, the ID is the destination network IP
address.
•For Network type, the ID is the IP interface address of
the network designated router.
•For Router type, the ID is the originating router’s
Router ID.
•For Summary-Net type, the ID is the destination
network IP address.