3-39
Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-8241-02
Chapter3 Configuring Open Shortest Path First
Showing OSPF Information
Showing the Redistribution Policy
To show the configured redistribution policy into OSPF, enter:
# show ospf redistribute
Table 3 -9 describes the fields in the show ospf redistribute command output.
Table3-9 Field Descriptions for the show ospf redistribute
Command
Static, RIP, Local, or
Firewall Field Description
Routes
Redistribution
Indicates whether the redistribution of static, RIP, local
or firewall routes is enabled or disabled. If route
redistribution is enabled, the configured metric, type,
and tag fields are displayed.
Route Metric
(displayed when
redistribution is
enabled)
The external cost for the route. The cost can range from
1 to 16777215. The default is 1.
Route Type
(displayed when
redistribution is
enabled)
The ASE type, either ASE Type1 or ASE Type2. By
default, the type is aseType2. The difference between
type1 and type2 is how the cost is calculated. For a type2
ASE, only the external cost (metric) is used when
comparing multiple paths to the same destination. For
type1 ASE, the combination of the external cost and the
cost to reach the ASBR is used.
Route Tag
(displayed when
redistribution is
enabled)
The 32-bit tag value to advertise the external route. The
route tag value is not used by the OSPF protocol itself. It
is used to communicate information between AS
boundary routers.