Chapter6 Configuring the Internet Protocol
Showing IP Configuration Information
6-16
Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-8241-02
Showing IP Routing Information
Use the show ip routes command to display IP routing information. The syntax
and options for this command are as follows:
•show ip routes - Displays the entire routing table, including host IP address,
next hop, interface, route type, protocol, age (in seconds), and metric.
•show ip routes firewall - Displays all firewall routes.
•show ip routes local - Displays all local routes.
•show ip routes ospf - Displays all OSPF routes.
•show ip routes rip - Displays all RIP routes.
•show ip routes static - Displays all static routes.
•show ip routes summary - Displays the total number of OSPF routes
(including a breakdown of Intra, Inter, and Ext routes), RIP routes, local
routes, static routes, and firewall routes.
•show ip routes ip_or_host {to ip_or_host | mask_or_prefix} - Displays
information about a route to a destination, a specific route, or routes in a
range.
The variables are as follows:
•ip_or_host - The IP address of the host or network prefix. Enter an IP address
in dotted-decimal notation (for example, 192.168.11.1). The IP address after
the to keyword is the final IP address in a range.
•mask_or_prefix - Subnet address of the specific network. Enter the subnet
address in mask or prefix notation (for example, /24).
To show all IP routes in the CSS, enter:
# show ip routes
Table 6 -4 describes the fields in the show ip routes command output.
Table6-4 Field Descriptions for the show ip routes Command
Field Description
Prefix/length The IP address and prefix length for the route.
Next hop The IP address for the next hop.