For quick | reference | Questions and Answers | |
| |||
| at the back | ||
to topics, | see the |
| |
|
| ||
INDEX |
| . |
|
|
|
| |
of this manual |
| ||
Below are the answers to some of the most common queries.
Remember…
?For television operation queries, please ring the helpline…
For UK only
Q Why is there no sound or picture?
A Check the mains switch is on and check all connections.
Check the TV is not in standby mode.
Q There IS a picture, but why is there little or no colour?
A When using an external source, for instance, a poor quality video tape, if there is little or no
colour, improvements may sometimes be achieved. The colour is factory set to AUTO to automatically display the best colour system.
To check that you have the best colour:
1With the external source playing, select COLOUR from the SET UP menu.
SET UP | z AUTO | x |
COLOUR | ||
SYSTEM | z I | x |
ASM |
| zx |
RRRz x
POSITION | z P00 x |
MEMORY | OK x |
e |
|
2With Sor Rchoose between AUTO, PAL, SECAM, NTSC, 4.43 or 3.58.
Q Why doesn’t the video/DVD being played show on screen?
A Make sure the VCR or DVD player is connected
correctly, then select the correct input by pressing B.
Q Why is there a good video picture but no sound?
A Check the Scart lead connection.
Q Why is there a picture but no sound?
A Check the volume has not been turned down or that sound mute has not been selected.
Q What else can cause a poor picture?
A Interference or a weak signal. Try a different TV station. MANUAL FINE TUNING (MFT) may help.
Q Why are the colours wrong when an NTSC source is played?
A Connect the source via a Scart lead and play. Select COLOUR from the SET UP menu.
1Set the Colour to AUTO and exit.
2Go to the PICTURE menu and adjust the tint.
Q Why doesn’t the remote control work?
A Check the batteries aren’t dead or inserted incorrectly.
Q Why is there a message permanently on the screen?
A Remove it by pressing CALL.
Q Why are there problems with teletext?
A Good performance of text depends on a good strong broadcast signal. This normally requires a
roof or loft aerial. If the Text is unreadable or garbled, check the aerial. Go to the main index page of the teletext service and look for the User Guide. This will explain the basic operation of teletext in some detail. If further information is needed on how to use text see the teletext section.
Q Why are there no teletext sub-pages?
A There are none broadcast or they have not yet loaded. Press the X(B) button to access.
(See teletext section).
15