Toshiba 34HFX85 appendix Turning off the built-in speakers, Selecting the Hdmi audio input source

Page 43

Turning off the built-in speakers

Use this feature to turn off the TV speakers when you connect an audio system (see “Connecting an audio system” on page 15).

To turn off the built-in speakers:

1.Press MENU, then press or to display the AUDIO menu.

2.Press ▲ or ▼ to highlight SPEAKERS, and then press or to select OFF.

AUDIO
MTS	STEREO
BASS	25
TREBLE	25
BALANCE	0
STABLE SOUND	OFF
SPEAKERS	ON / OFF
:SELECT	:ADJUST

To turn on the built-in speakers:

Select ON in step 2 above.

Selecting the HDMI audio input source

See page 14 for details on connecting an HDMI or a DVI device to the TV’s HDMI input.

If you connect a DVI device, to hear audio you must also connect the analog audio cables to the HDMI audio IN jacks (see page 14). Set the HDMI audio input setting to “DVI” with this connection.

If you connect an HDMI device and play media with digital audio output, to hear digital audio, set the HDMI audio input setting to “HDMI” with this connection.

If you connect an HDMI device but play media with analog audio output (for example, certain CDVs do not output digital audio), to hear audio you must also connect the analog audio cables to the HDMI audio IN jacks (see page 14). Set the HDMI audio input setting to “DVI” with this connection.

To select the HDMI audio input source:

1.Press MENU, and then press or to display the AUDIO menu.

2.Press or to highlight HDMI.

3.Press or to select HDMI or DVI.

AUDIO
BBE	OFF
HDMI	HDMI / DVI
RESET
:SELECT	:ADJUST

Displaying TV status information on-screen

Press RECALL to display the following information on-screen:

•Clock

•Channel number or VIDEO mode selected

•Channel label (if set)

•Stereo or SAP (second audio program) audio status

•Content rating

•On timer, Sleep timer (if set)

•Picture size

S T E R E O
S A P
TV- PG L	V
ON TIMER	12:00AM
SLEEP TIMER 2h00m
	ANT
FULL	ABCD

CABLE 0 0 7

CLOCK 12:00AM

43

MENU

RECALL

Safeguards

Important

ToshibaWelcome to

yourConnecting TV

Remote ControlUsing the

your TVSetting up

FeaturesUsing the TV’s

Appendix

J3U00321B(E)_P41-Back

43

9/08/2005, 10:40 AM

Image 43

Contents 34HFX85 Computer PC. This TV is not intended for use With a PC Dear CustomerImportant Safety Instructions Care Setting up your TV Important Safety Information Welcome to ToshibaConnecting your TV Using the remote controlTV front panel Welcome to ToshibaExploring your new TV Selecting a location for the TVConnecting a VCR Connecting your TVStereo VCR Converter/Descrambler Splitter Switch Connecting a cable converter box or AntennaFrom Cable Connecting a DVD player/satellite receiver and a VCR DVD player with Component video DTV Receiver With Component video Connecting two VCRs Connecting a camcorder To connect a DVI device, you will need Connecting an Hdmi or a DVI device to the Hdmi inputAmplifier Connecting an audio systemYou will need One pair of standard audio cables Mode Device Using the remote controlPreparing the remote control for use Installing the remote control batteriesRemote control functional key chart Record Disc shiftDisc shift Deck side StopSearching and sampling the code of a device Press Mode to select the TV mode to control the TVOperational feature reset Using the volume lock featureDevice code table VCR setup codesCD Player setup codes Learning about the remote control Starting setup Setting up your TVChanging the on-screen display language Adding and erasing channels manually Image tilt correctionAdding channels to the TV’s memory Programming channels automaticallyChanging channels Using the TV’s featuresAdjusting the channel settings Switching between two channelsTo clear your favorite channels Using the Locks menuSelecting a password To select your password and access the Locks menuUsing the V-Chip parental control feature To unlock channels Locking channelsTo lock channels Press Enter . Repeat steps 1 through 6 to lockLocking the video inputs Setting the GameTimerTMLabeling channels Using the front panel lock featureLabeling the video input sources Selecting the video input sourceTo label the video input sources Select Center of the picture remains This mode cannot be scrolledConventional 43 picture On a conventional TV ScreenFull picture size for 169 source programs TheaterWide 2 picture size for letter box programsTheaterWide 3 picture size example To lower the picture, press Scrolling the TheaterWide picture TheaterWide 2 and 3 onlyPress To raise the picture, pressUsing the Aspect feature Selecting the cinema modeSelecting the display format for 480p signals only To adjust the picture quality Adjusting the picture Selecting the picture modeAdjusting the picture quality To select the picture modeUsing the CableClear feature Selecting the color temperatureSelecting the Scan Velocity Modulation SVM Setting the sleep timer Resetting your picture adjustmentsUsing the closed caption feature Selecting stereo/SAP broadcasts Adjusting the sound Muting the soundAdjusting the sound quality To adjust the sound qualityUsing the StableSound feature Resetting your audio adjustmentsUsing the BBE sound feature Selecting the Hdmi audio input source Turning off the built-in speakersDisplaying TV status information on-screen Symptom Solution Auto power offUnderstanding the Power Return feature TroubleshootingSpecifications Limited United States Warranty Memo National Service Division