To Memorize Channels, Adjusting the Picture

〈 0 – 9 / + / – / ENTER / MENU 〉

TO MEMORIZE CHANNELS

This TV is equipped with a channel memory feature that allows the TV to skip up or down to the next channel set into memory, skip- ping over unwanted channels.

Before selecting channels, they must be programmed into the TV’s memory. In addition to normal VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an antenna, set the TV/CABLE menu option to the TV setting. When shipped from the factory, this menu option is in the CABLE setting.

TO ADD/DELETE CHANNELS

1	Press MENU.
2	Press SET + or – until the indicator next to
	“CH SETUP” begins to flash, then press
	ENTER.

3	Press SET + or – until the indicator

CH SETUP

PICTURE

LANGUAGE

V-CHIP SET

LOCK

ON TIMER

〈+ / — / ENTER / MENU 〉

TV/CABLE SELECTION

1 Press MENU.

2 Press SET + or – until the indicator next to “CH SETUP” begins to flash, then press

ENTER.

3 Press SET + or – until the indicator next to “TV/CABLE” begins to flash.

CH SETUP

PICTURE

LANGUAGE

V-CHIP SET

LOCK

ON TIMER

〈+ / — / ENTER / MENU 〉

next to “ADD/DELETE” begins to flash,

then press ENTER.

4 Select the desired channels to be

added or deleted using the Direct

Channel Selection buttons (0–9), CH +

or –, SET + or –.

TV CABLE

AUTO CH MEMORY

ADD / DELETE

〈+ / — / ENTER / MENU 〉

4 Press ENTER to select the TV or CABLE mode. The arrow indicates the selected mode.

5 Press MENU repeatedly until the menu screen is cleared.

TV CABLE AUTO CH MEMORY ADD / DELETE

〈+ / — / ENTER / MENU 〉

5 Press ENTER to select ADD or DELETE.

If an unmemorized channel was selected (step 4), the channel indication will be red. Press ENTER if you wish to ADD the unmemorized channel. The channel indica- tor will change from red to green when a channel is added and the channel will be memorized.

NOTE:

Contact your cable company to determine the type of cable system used in your area.

If a memorized channel was selected (step 4), the chan- nel indication will be green. To delete the channel from memory, press ENTER repeatedly until

AUTOMATIC CHANNEL MEMORY

1	Press MENU.
	Press SET + or – until the indicator next to
2	Press SET + or – until the indicator next to
	“CH SETUP” begins to flash, then press
	ENTER.

3	Press SET + or – until the indicator next
	to “AUTO CH MEMORY” begins to flash,
	then press ENTER. The TV will begin
	memorizing all the channels available in
	your area. Channel numbers will remain
	red until auto memorizing is complete.

CH SETUP

PICTURE

LANGUAGE

V-CHIP SET

LOCK

ON TIMER

〈+ / — / ENTER / MENU 〉

TV CABLE

AUTO CH MEMORY

ADD / DELETE

〈+ / — / ENTER / MENU 〉

“DEL” appears on-screen. The channel ADDCH 012 indicator will change from green to red

when a channel is deleted. Repeat steps 4 and 5 for each channel to be added or deleted.

6 Press MENU repeatedly until the menu screen is cleared.

4 Press MENU repeatedly until the menu screen is cleared.

ADJUSTING THE PICTURE

You can adjust the settings for brightness, contrast, color, tint and sharpness.

1	Press MENU.
2	Press SET + or – until the indicator next to “PICTURE”
	begins to flash, then press ENTER.
3	Press ENTER repeatedly to select the item you want to
	adjust.