Toshiba 19A25 manual Setting the Language, TV Operation, Enter

caption text

SETTING THE LANGUAGE

This TV can display the on-screen displays and adjustment menus in English, Spanish, or French.

The on-screen language selection (step 3, below) will automatically appear on the screen when you press the MENU button initially. Select the language you prefer first, then proceed with the other menu options.

		MENU			Press SET + or – until the “ ”
1	Press MENU.			3
			PITURECHSETUP		indicator points to the desired	LANGUAGE / IDIOMA / LANGUE
			ANGUAGE		language: English (ENGLISH),	ENGLISH
			V-CHIPSET			ESPAÑOL
			LOCK		Spanish (ESPAÑOL) or French
2	Press SET + or – to select the		ON		(FRANCAIS), then press ENTER.	FRANCAIS
	LANGUAGE mode, then press	〈 +/–/ENTIMER/MENU〉				〈 + / – / ENTER / MENU 〉
	ENTER.

4

Press MENU repeatedly until the menu screen is cleared.

NOTE:

If Spanish or French is chosen, the closed caption indicators will be in the selected language, but the closed will not be affected by the language selection.

TV OPERATION

1	To turn on the TV, press POWER.
2	The VOLUME can be adjusted to a desired level by
	pressing VOL (VOLUME) + or –.
	The sound level will be indicated on the TV screen by
	GREEN BARS AND A NUMBER. As the sound level
	increases, so do the number of BARS AND THE
	NUMBER on the screen. The same is true for decreas-
	ing the level.
3	Set the TV/CABLE menu option to the appropriate
	position. When shipped from the factory, this menu
	option is in the CABLE setting. See “TO MEMORIZE
	CHANNELS” on page 9.
		TV - VHF/UHF channels
		CABLE - CABLE TV channels
4
		CH (CHANNEL) + and – buttons
		Press and release CH (CHANNEL) + or –. The
		channel automatically stops at the next channel

programmed into the TV’s memory. Press and hold the button down to change channels more quickly.

For proper operation, make sure you program channels into the TV’s memory before tuning channels.

See “TO MEMORIZE CHANNELS” on page 9.

DIRECT CHANNEL SELECTION buttons (0–9) - Press

these buttons to select a channel. The channel number will appear on the upper right corner of the TV screen. If an invalid channel number is selected, the display will revert to the previous channel.

TV MODE DIRECT CHANNEL SELECTION - When the

TV/CABLE menu option is in the TV position, all channels can be instantly selected by using two buttons (For example, to select channel 2, press “0,” then “2.” If you press only “2,” channel selection will be delayed for a few seconds). For channels 10 and above, press the two digits in order.

CABLE mode direct channel selection

When the TV/CABLE menu option is in the CABLE position, channels can be selected as follows:

1-9	Press “0” twice, then 1-9 as needed.
	Example, to select channel 2, press
	“002.”
10-12	Press “0”, then the remaining 2 digits.
	Example, to select channel 12, press
	“012.”
13-99	Press the 2 digits in order.
	Example, to select channel 36, press
	“36.”
100-125	Press the 3 digits in order.
	Example, to select channel 120, press
	“120.”

NOTE: If the station being viewed stops broadcasting, the TV will automatically shut off after 15 minutes.

8

J3M21921A(E)_P08-12 8 14/12/2004, 5:01 PM