SELECT
ADJUST
PICTURE SCROLL START
PICTURE SIZE START
ADD / ERASE ADD ERASE
CH PROGRAM START
TV / CABLE
CABLE
PICTURE AUDIO
SETUP OPTION
CH
SELECT
ADJUST
PICTURE SIZE START
PICTURE SCROLL START
CH PROGRAM START
ADD / ERASE ADD
TV CABLE
TV / CABLE
SETUP OPTION
PICTURE AUDIO
CH
Changing channels
To change to the next programmed channel:
Press CHANNEL ▼/▲ on the TV front panel or CH +/– on the remote control.
To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0–9 and 100) on the remote control.
For example, to select channel 125, press 100, 2, 5.
17
1. Select the channel you want to add or erase.
If you are adding a channel, you must select the channel using the Channel Number buttons.
2. Press MENU, then press or to display the SETUP menu.
3. Press ▲ or ▼ to highlight ADD/
ERASE.
4. Press or to select ADD or ERASE, whichever function you want to perform.
5. Repeat steps 1–4 for other channels you want to add or erase.
4. Press ▼ to select CH PROGRAM.
5. Press or to start channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory.
While the TV is cycling through the channels, the message “PROGRAMMING NOW-PLEASE WAIT” appears.
6. When channel programming is complete, the message “COMPLETED” appears.
7. Press CH + or – to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add or erase specific channels manually.
To add or erase channels manually:
If you use an antenna, choose TV. If you use cable, choose CABLE.
To add channels automatically:
1. Press MENU, then press or to display the SETUP menu.
2. Press ▲ or ▼ until the TV/CABLE selection is highlighted.
3. Press or to highlight either TV or CABLE, depending on
which you use.
Adding channels to the TV’s memory
When you press CH +/- on the remote control or CHANNEL ▼/▲ on the TV front panel, your TV will stop only on the channels stored in the TV’s channel memory. Follow the steps below to program channels into the memory.
Programming channels automatically
Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory automatically, you can add or erase specific channels manually.
Channel
Numbers
Channel +/–
Menu
Safeguards
Toshiba
your TV
Remote Control
your TV
Features
Important
Welcome to
Connecting
Using the
Setting up
Using the
TV’s
Appendix
17 | 30/06/2005, 5:08 PM |