Toshiba 26AF45C appendix Locking channels, Using the TV’s Features

20

Using the TV’s Features

4.Use the Channel Number buttons (0–9) to enter your PIN code. If you are accessing the LOCK menus for the first time, select a four-digit number to be your PIN code. Press ENTER.

The BLOCKING menu appears.

	CH
PICTURE AUDIO	SETUP OPTION
LOCK
CH LOCK	START
VIDEO LOCK	OFF
GAME TIMER	OFF
NEW PIN CODE	START
SELECT	ADJUST

5.You may now enable blocking. See “Locking channels” (below), “To change your PIN code” (below), or “Locking video input” (page 21), or “Setting the GameTimer™” (page 21).

To change your PIN code:

1.Press MENU, then press or to display the OPTION menu.

2.Press ▲ or ▼ to highlight LOCK.

3.Press or to display the BLOCKING menu.

4.Use the Channel Number buttons (0–9) to enter your PIN code. Press ENTER. The BLOCKING menu appears.

5.Press ▲ or ▼ to highlight NEW PIN CODE and press or to display the NEW PIN CODE menu.

6.Use the Channel Number buttons (0–9) to enter a new code. Press ENTER.

7.Press EXIT to return to normal viewing.

Locking channels

With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the setting. You can choose to lock up to nine TV channels and nine cable channels.

To lock channels:

1.Use the Channel Number buttons (0–9, 100) to display the television channel you wish to lock.

2.Press MENU, then press or to display the OPTION menu.

3.Press ▲ or ▼ to highlight LOCK.

4.Press or to display the LOCK menu.

5.Use the Channel Number buttons (0–9) to enter your PIN code, then press ENTER. The LOCK menu appears.

6.Press ▲ or ▼ to highlight CH LOCK and press or to display the CH LOCK menu.

7.Press or to select the following:

• SET– to set the channel as one to be		CH
	PICTURE AUDIO	SETUP OPTION
locked. Then press ENTER.
• CLEAR– to clear all channels from	LOCK
the list of locked channels.	CH LOCK		START
	VIDEO LOCK		OFF
Then press ENTER.	GAME TIMER		OFF
8. Repeat steps 1 through 7 to lock other	NEW PIN CODE		START
	SELECT		ADJUST
channels. When you are finished
locking channels, press EXIT to return

to normal viewing.				CH
If you try to tune a locked channel, the	PICTURE	AUDIO		SETUP		OPTION
TV will not display it, but will display the
	CH LOCK : CH 12
						CLEAR
nearest unlocked channel.	SET/CLEAR				SET
	LOCKED CH			0		0	0
				0		0	0
	TV CABLE			0		0	0
	SELECT				SET		ENTER
	END		EXIT

Note:

If you forget your PIN code, press DISPLAY four times within five seconds from the BLOCKING menu. This resets your PIN code and allows you to proceed to the BLOCKING menu.

Display

Channel

Numbers

Menu/

Enter

Exit

Channel

Numbers

Menu/

Enter

Exit

Note:

After programming CH LOCK, change channels before turning off the television.

J3V50121A(E)_P18-30.p65 20 30/06/2005, 5:08 PM