TV operation
TV operation
TV operation
1 To turn on the TV/DVD, press POWER.
The Power indicator on the front of the main unit will light.
2 Adjust the volume level by pressing VOL + or
VOLUME32
3 Set the TV/CABLE selection to the appropriate position. 22
POWER
VOL +/–
4 Press direct channel selection
TV mode direct channel selection When the TV/CABLE selection is in the TV position, all channels can be instantly selected by using two buttons. (for example, to select channel 2, press “0”, then “2”.
If you press only “2”, channel selection will be delayed for a few seconds.) For channels 10 and
above, press the 2ANT 02
digits in order.
CABLE mode direct channel selection When the TV/CABLE selection is in the CABLE position, channels can be selected as follows:
TO SELECT CABLE TV CHANNELS:
TV operation
TV - VHF/UHF channels
CABLE - Cable TV channels
Auto power off
If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.
NOTE FOR CHANNELS
If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 2 seconds.
TV | CATV |
VHF | VHF |
UHF | STD/HRC/IRC |
| (A) (W) |
| |
| (AA) (WW) |
| |
| (AAA) (ZZZ) |
| |
| (86) (94) |
| |
| |
| |
| (100) (125) |
| 01 |
| (5A) |
|
|
Note:
If a channel with no broadcast is selected, the sound will automatically be muted.
23
J5X00301A [E] | 23 | 16/3/06, 3:49 PM |