Basic playback
Playing a disc (Continued)
To obtain a higher quality picture
Occasionally, some picture noise may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. In such case, you may reduce the SHARPNESS with the Picture control adjustment menu (see page 28).
| About | DVD | VCD | CD | |
| The | DVD | VCD | CD | icons on the heading bar show the playable discs for the |
| function described under that heading. | ||||
|
| : You can use this function with DVD video discs. | |||
| VCD | : You can use this function with Video CDs. | |||
| CD | : You can use this function with Audio CDs and |
DVD
VCDCD Basic playback
To pause playback (still mode)
Press PAUSE during playback. | To remove the disc |
|
POWER
TV/DVD EJECT
VOL +/–
ENTER
// /
PAUSE
PLAY
STOP
To resume normal playback, press | Press EJECT. |
PLAY. |
|
•The sound is muted during still mode.
Remove the disc after the disc comes out.
To stop playback
Press STOP.
Notes:
•If a
•Some discs may take a minute or so to start playback.
•When you set a
•Some discs may not work the resuming facility.
•Resuming cannot function when you play a
•Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs.
•Do not move the unit during playback. Doing so may damage the disc.
•Use the EJECT button to unload and eject the disc.
•Do not put any objects other than discs on the disc slot. Doing so may cause the unit to malfunctions.
•There may be a slight delay between the button is pressed and the function activates.
32
J5X00301A [E] | 32 | 16/3/06, 3:52 PM |