Toshiba DKVR60KU owner manual Hints for Timer Recording, Priority of Overlapped Settings

Page 42

TIMER RECORDING

Hints for Timer Recording

If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost.

If a disc is not inserted or if a inserted disc is not recordable (finalized DVD-RW/-R, finalized DVD+RW, a fully recorded disc, etc.), “DVD” on the front panel

display flashes and timer recording cannot be performed. In some cases, will appear momentarily around the start point as the unit attempts to record. Please insert a recordable disc.

If a cassette tape with an erase-protection tab is not in the cassette compartment or there is no cassette tape in the cassette compartment, “VCR” on the front panel display flashes and timer recording cannot be performed. Please insert a recordable cassette tape.

If you press [TIMER SET] and turn on the unit while either DVD or VCR is in timer standby mode, disappears. In this case, you cannot change the mode between DVD and VCR. You cannot change any settings using [SETUP] or edit discs.

When all the timer recording is completed, flashes. To play back or eject the recorded disc, press

[I/y ON/STANDBY] first, then select the recorded title and

press [PLAY B], or [OPEN/CLOSE A] to remove the disc.

During timer recording or timer standby mode ( will appear), any operations on the unit will not be available. To make these operations available, press [STOP C] to

stop the timer recording or [TIMER SET] to cancel timer standby mode ( will disappear).

To cancel the timer standby mode, press [TIMER SET].

When the starting and the ending time are the same, “Exceeds 12 hours” appears and the program setting will not be accepted.

When the programmed starting and ending time are earlier than the current time, the setting will not be accepted.

If the starting time is earlier and the ending time is later than the current time, the recording will start right after [TIMER SET] is pressed.

The timer recording cannot be performed in DVD and VCR at the same time. If you set 2 programming with the same channel and time in both devices, the program with a lower program number will be recorded.

“Press TIMER SET for timer recording” will appear on the TV screen 5 minutes before the programmed starting time.

The Priority of Overlapped Settings

This unit records the programs according to priority if the timer programmings are overlapped. The timer programming set previously has priority.

A timer recording of lower priority will be canceled or start from the middle. Check the overlapped timer programmings and change the priority if necessary.

When the starting time is the same:

A program set previously (PROG. A) has priority.

PROG. A

PROG. B

actual

 

 

 

 

 

PROG.A.A

 

PROG. B

recording

 

 

 

 

 

 

The first 2 minutes (at the longest) will be cut off.

When the starting time and the ending time for each programs are different:

A program that has earlier start time has priority.

PROG. A

 

 

PROG. B

 

 

PROG. C

 

 

actual

PROG. A

PROG. C PROG.B

recording

 

 

The first 2 minutes (at the longest) will be cut off.

When the recording time is partially overlapped:

PROG. A will start after PROG. B is complete to be recorded.

PROG. A

PROG. B

 

 

 

 

actual

 

 

 

 

 

PROG.B

 

PROG.A

recording

 

 

The first 2 minutes (at the longest) will be cut off.

When the recording time is entirely overlapped:

PROG.A will not be recorded.

PROG. A

 

PROG. B

 

actual

PROG. B

recording

 

Note for DVD recording

When the recording time of 2 programs are overlapped, or the end time of a program and the start time of another program is the same, the first 2 minutes (at the longest) of the subsequent program will be cut off.

If the cut-off portion comes up to 3 minutes or more, this program will be displayed with errors number E40 in the timer programming list.

42 EN

When the end time of the programming currently being recorded and the start time of the subsequent program are same:

The beginning of the PROG. B may be cut off.

PROG. A

 

 

PROG. B

 

 

actual

PROG. A

PROG. B

recording

 

 

The first 2 minutes (at the longest) will be cut off.

E9PKBUD_DKVR60KU_EN.indd 42

8/11/2009 4:00:37 PM

Image 42
Contents Owner’s Record EditingPrecautions Symbol for Class ll Double InsulationAdditional Safety Instructions Location and Handling PrecautionsTo Avoid the Hazards of Electrical Shock and Fire Dew Condensation WarningIR Signal Check Installation LocationSupplied Accessories Avoid the Hazards of Electrical Shock and FireCleaning Discs Maintenance ServicingCleaning the Cabinet Cleaning the Disc Lens Disc HandlingContents Contents Features Features DVD-RW DVD+RWRegion Codes Unplayable DiscsColor Systems CD-DA CD-RWRear Panel Functional OverviewFront Panel Introduction ConnectionsFunctional Overview Installing the Batteries in the Remote ControlUsing a Remote Control Open the cover Insert batteriesSetup button OPEN/CLOSE a button DVD modeVCR mode Clear button DVD modeThevcr / DVD Recorder Switching DVD indicatorOn-Screen Display / Menu OFFFile name information Guide to ON-SCREEN Displays and MenusTitle name information First, track name will be displayedMain Menu Front Panel Display Guide Display MessageDB HDD TV Connection Overview Connecting to an External TunerConnections Supplied cables used in this connection are as followsConnections Connecting to a TV with an Hdmitm Compatible PortHdmi Video Resolution and Actual Output Signals Copyright protection systemConnecting to a TV with Component Video Input Jacks Connecting to a TV with an S-Video Input JackConnecting to a TV with Audio / Video Input Jacks Connecting to a TV without Audio / Video Input JacksRCA audio cable L/R x RCA video cable x Digital Audio Connection To set up Hdmi Audio, refer to pages 87To set up Dolby Digital, refer to pages 86 Supplied cables used in these connections are as followsChannel Analog Audio Connection RCA audio cable L/R xInitial Setting Proceed to in Clock Setting onPress Setup to exit Setting the ClockClock Setting Use K / L to select calendar or time, then press EnterSettings for the Video Input ConnectionsFormatting a Disc Choosing the Recording Format of a Brand-New DVD-RWUse K / L to select Yes, then press Enter Formatting a DiscReformatting a Disc Manually Formatting is completed.100% is indicatedTo cancel the disc protect Setting a Disc to ProtectPress Setup Use K / L to select DVD Menu, then press Enter Use K / L to select Disc ProtectPlayingthe Discs in Other DVD Players Auto FinalizingPlaying the Discs in Other DVD Players Finalizing a DiscFinalizing is completed To cancel finalizing DVD-RW only Restrictions on Recording Recording ModeInformation on DVD Recording VideoMake Recording Compatible Settings for a RecordingSetting for Auto Chapter EnterRecording Audio Select XP Settings for a RecordingSetting Aspect Ratio for Video Mode RecordingFollow the steps to record TV programs Press I/y ON/STANDBYPress OPEN/CLOSE a to close the disc tray Align the disc to the disc tray guidePress Stop C to stop recording Basic Recording & ONE-TOUCH Timer RecordingPress REC I to start recording Will be displayed for 5 secondsBefore recording, make sure Timer RecordingGuide to Timer Programming Display If you have not set the clock yetUse K / L to enter the date, then Press Enter when all items are enteredMode Press Timer SET to set a timer Press BTimer Recording To stop the timer recording in progressHints for Timer Recording Priority of Overlapped SettingsPress Play B, or OPEN/CLOSE a to remove the disc Satellite Link Select whichever the componentSatellite Link External device Settings for AN External DeviceConnection to an External Device Supplied cables used in this connection are as followsSettings for AN External Device Recording from an External DeviceIt takes awhile to load Disc DV Dubbing Guide to DV and On-Screen DisplayDV Dubbing DVC to DVD DubbingRepeat the steps 1 and 2 on DVC to VCR DubbingPress VCR first To stop recording, press Stop CUse K / L to select Recording, then press Enter DVD/VCR DubbingUse K / L to select Dubbing Mode, then press Enter Make sureUse K / L to select DVD VCR, then press Enter DVD/VCR DubbingUse K / L to select VCR DVD, then press Enter VCR to DVDStructure of Disc Contents Information on PlaybackBasic Playback Direct PlaybackBasic Playback Playback from the Title ListFollow steps 1 to 2 in Direct Playback on JpegWhen selecting file Playing Back a DivXDivX5.x, DivX6.0 Official DivX Certified productDivX3.x, DivX4.x Maximum size of imagePress DVD first During playback, press Pause F Using the Title/Disc MenuPause Playback will be paused and sound will be mutedFast Forward / Fast Reverse Playback Special PlaybackResume Playback 40x REVStep by Step Playback Special PlaybackRapid Playback Slow Forward / Slow Reverse PlaybackMarker Setting ZoomWhile viewing a TV broadcast via this unit, press Time Slip Chasing Playback during RecordingDuring recording, press Play B This unit start to record the TV broadcastChapter Simultaneous Playback and RecordingSelected title playback will start To move to for chapter, press BSearch Using Skip j / SkipUsing Display Title/Chapter SearchSearch Time SearchAudio CD Repeat Playback Random PlaybackProgram Playback Slide Show5Press Play B TOP Menu to display the disc menu Switching SubtitlesSwitching Audio Soundtrack If you press Audio , skip toSelecting the Format of Audio and Video Switching Virtual Surround SystemSwitching Camera Angles Reducing Block NoiseUse K / L to select OFF or ON, then press Enter Adjusting Black LevelUse K / L to select Black Level, then press Enter VisibleInformation on Disc Editing Guide to a Title ListDelete Deleting TitlesAfter the disc is fully recorded You can record You cannot New title RecordYou can delete titles which you do not need anymore Deleting TitlesUse K / L to select Title Delete, then press Enter Title list, original or playlist will appearUse K / L to select Add To Playlist, then press Enter CREATING/DELETING PlaylistAdding Titles to a Playlist Title is added to playlistCREATING/DELETING Playlist Erasing All PlaylistPlaylist can be deleted if it is no longer needed Editing Discs Putting Names on TitlesEditing Discs Putting Names on Titles cont’dGuide to Edit Title Name Press Return Setting Chapter MarksUse Skip H / G Press Return again and then Return or Stop C to exitUse Skip H or Skip G to decide the chapter to be hidden Hiding ChaptersUse K / L to select Hide Chapter, then press Enter Press EnterDisplay Edit menu Deleting a Part of a TitleNames on Titles on page 76 to Follow the steps 1 to 3 in PuttingDeleting a Part of a Title cont’d Use K / L/s / B to select a desired title, then press Enter Dividing a TitlePress DVD Stop mode, press TOP Menu Press Return or Stop C to exitYou can combine two titles into a single title Combining TitlesCombining, then press Enter Two titles will combine into a single titleConfirm the indication OFF ON. Press Enter again Setting or Releasing the Title ProtectionTo protect a whole disc VR mode DVD-RW, DVD+RW/+R only Press Return and then Return or Stop C to exitSetting or Clearing All Chapter Marks at Once Use K / L to select Chapter MarkUse K / L to select the desired List of the Default Settings Items highlight is the default ContentsList of the Default Settings Normal Output Enhanced Yes Set to the default settingUse K / L to select a desired item, then press Enter General SettingPlayback Press Stop C if you are playing back a discUse the Number buttons to enter the current password General SettingParental Lock Default OFF Playback cont’dAudio Out Subtitle Language Default OFF Disc Menu Language Default EnglishAudio Language Default Original Angle Icon Default onFL Dimmer Default Bright OSD Language Default EnglishScreen Saver Default 10 minutes DisplayDisplay cont’d ChipUse the Number Buttons to enter new access password Canadian French RatingVideo Progressive Default OFFTV Aspect Default 169 Wide Selected itemDivX VOD DivX Subtitle Default OFFDivX Set the DivX subtitleFormat Default RGB When the connected device is not compatible withSetting RGB Range Default Normal Hdmi Audio Default onSet to OFF when the Hdmi sound is not output Hdmi cont’dReset All Select Yes using K / L , then press EnterReset the setting to default VCR Functions Information on VCR FunctionsTracking Using REC I or Stop C One-touch Timer Recording OTRYou cannot pause the one-touch timer recording VCR FunctionsOther Operations Troubleshooting Symptom RemedyTimer SET Troubleshooting SymptomTroubleshooting Frequently Asked Questions Can I record to CD-RW/-R?Language Code Language CodeGlossary Recording SpecificationsGeneral Input / OutputLimited Warranty Limited WarrantyLimited Warranty LPLWHG2QH  HDUDUUDQW\RQ3DUWVDQG/DERXU112 EN Memo