Toshiba DKVR60KU Video, Selected item, Refer 1 to 2 on this page and set, Progressive Default OFF

GENERAL SETTING

Introduction

Video

.@/:	ABC	DEF
GHI	JKL	MNO	TRACKING
PQRS	TUV	WXYZ	SAT.LINK
	SPACE		TIMER
			PROG.
	SETUP	DISPLAY	AUDIO
DISC MENU			TOP MENU
	ENTER
CLEAR			RETURN
	INSTANT	1.3x/0.8x	TIME SLIP
	SKIP	PLAY
REV	PLAY		FWD
SKIP	STOP		SKIP
PAUSE		VCR	DVD
DUBBING		REC MODE REC
REPEAT TIMER SET SEARCH			ZOOM

Press [STOP C] if you are playing back a disc.

1Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER].

2Use [K / L] to select “Video”, then press [ENTER].

3Use [K / L] to select a desired item, then press [ENTER].

1 Progressive

2TV Aspect

3 Select Video

Submenu will appear.

4	Refer 1 to 2 on this page and set
	the selected item.
	• For 3 , refer to “SETTINGS FOR THE VIDEO
	INPUT“ on page 27.

5When you finish with the setting, press [SETUP] to exit.

1 Progressive (Default : OFF)

This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to “ON”.

1) Use [K / L] to select “ON“, then press [ENTER].

Progressive

ON

OFF

2) Use [{ / B] to select “Yes“, then press [ENTER].

Activating progressive scan:

Check your TV has progressive scan

and connect with component video cable.

NOTE :

If there is no picture or picture is distorted after selecting “Yes”,

Wait about 15 seconds for auto recovery.

Activate? Yes No

3)Use [K / L] to select “Yes“ within 15 seconds, then press [ENTER].

Your setting will be activated.

Note

•If your TV is compatible with progressive scan (480p), you are recommended to use the HDMI cable (supplied) or component video cable (commercially available) to

connect this unit to the TV. (Refer to pages 20-21.) If not, use the RCA video cable and set the progressive scan to “OFF”.

•If the Progressive Scan image is distorted, you can cancel Progressive Scan by pressing and holding [SETUP] for more than 3 seconds during DVD playback. The “Progressive” setting will be “OFF”.

•When selecting “No” or not pressing any buttons on the unit or remote control within 15 seconds at step 3, progressive scan remains to be “OFF” (interlace scan).

2 TV Aspect (Default: 16:9 Wide)

You can select the TV aspect ratio to match the formats of what you are playing back with the unit and your TV screen (4:3 standard or 16:9 widescreen TV).

Use [K / L] to select a desired option, then press [ENTER].

TV Aspect

4:3 Letter Box

4:3 Pan & Scan

16:9 Wide

If you have a standard TV:

Select “4:3 Letter Box”, so that black bars appear on the top and bottom of the TV screen when playing back a wide-screen picture. Select “4:3 Pan & Scan” for a full height picture with both sides trimmed when playing back wide-screen picture.

If you have a widescreen TV:

Select “16:9 Wide”.

EN 95

Disc Connections Basic Setup Management Recording Playback Editing Function Setup VCR Function Others

E9PKBUD_DKVR60KU_EN.indd 95

8/11/2009 4:01:46 PM