Sony DVP-S500D manual 30EN, Controlling TVs with the remote

Playing Discs in Various Modes

To change the password

1In Step 5, select “CHANGE PASSWORD” using >/., then press /or ENTER.

The display for changing the password appears.

2Follow Steps 4 and 5 to enter a new password.

zIf you have forgot your password

Enter 6 digits number “199703” in Step 4 to clear the current password. To enter a new password, follow the procedure from Step 4 again.

Notes

•When you play DVDs which do not have the Parental Control function, playback cannot be limited on this player.

•When you do not set a password, you cannot change the settings for playback limitation.

•Depending on the DVD, you may be asked to change the parental control level while playing the disc. In this case, enter the password, then change the level.

When you stop playing the DVD, the level returns to the original level.

Standard	Code number
Austria	2046
Belgium	2057
Canada	2079
China	2092
Denmark	2115
Finland	2165
France	2174
Germany	2109
Hong Kong	2219
Indonesia	2238
Italy	2254
Japan	2276
Malaysia	2363
Netherlands	2376
Norway	2379
Philippines	2424
Singapore	2501
Spain	2149
Sweden	2499
Switzerland	2086
Taiwan	2543
Thailand	2528
United Kingdom	2184

Controlling the TV or the AV receiver with the Supplied Remote Z

If you adjust the remote signal, you can control your TVs with the supplied remote. Default setting is to control Sony TVs with the gmark.

When you connect the player to a Sony AV receiver, you can also set the input of the receiver to this player with the supplied remote .

TV/DVD
switch			POWER
	1	2	3
Number	4	5	6
buttons	7	8	9
		0

Controlling TVs with the remote

1Slide TV/DVD switch to TV.

2Hold down POWER, and enter your TV’s manufacturer’s code in the table below using the number buttons. Then release POWER.

Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Notes

•If you enter a new code number, the code number previously entered will be erased.

•When you replace the batteries of the remote commander, the code number automatically resets to 01 (Sony). Reset the appropriate code number.

30EN