Toshiba SD-KV540SU owner manual Dvd+Vcr

Troubleshooting (Continued)

Symptom	Cause	Correction
The DVD+VCR does	An unplayable disc is inserted.	Insert a playable disc. (Check the disc
not start playback.		type and Regional code.)
			REFERENCE
	The disc is placed upside down.	Place the disc with the playback side
		down.
	The disc is not placed within the	Place the disc on the disc tray correctly
	guide.	inside the guide.
	The disc is dirty.	Clean the disc.
	The Rating level is set.	Cancel the Rating function or change
		the rating level.
Video tape cannot be	Is the cassette compartment empty?	Eject the tape in.
inserted.
No Hi-Fi sound	Audio mode is not set properly.	Select STEREO by repeatedly pressing
		AUDIO on the remote control.
The remote control	There is an obstacle in the path of the	Remove the obstacle.
does not work properly.	remote control and this unit.
	The batteries in the remote control are	Replace the batteries with new ones.
	exhausted.
	The remote control is not pointed at	Point the remote control at the remote
	the remote sensor of the DVD+VCR.	sensor of the DVD+VCR.
	The remote control is too far from the	Operate the remote control within 23ft
	DVD+VCR.	(7m).
	This remote control use the same but-	When using a VCR, first press the VCR
	tons for VCR and DVD functions	button. When using a DVD, first press
	(ex.PLAY).	the DVD button.
Camcorder image is	Camcorder is off.	Turn camcorder on and operate
not shown.		properly.
Camcorder image via	DVD+VCR SOURCE SELECT is not	Press INPUT SELECT to select LINE
AV input to DVD+VCR	set to LINE1 or LINE2.	input channel (LINE1 or LINE2).
is not shown on TV
screen.
Timer recording is not	Clock in DVD+VCR is not set to	Set clock to correct time.
possible.	correct time.
	Timer has been programmed	Reprogram Timer.
	incorrectly.
	indicator light does not appear after	Reprogram Timer and turn DVD+VCR
	programming timer.	off to enable timer.

39